SOLTEK SL-B5A-FG Manual page 54

SL-B5A-FG / B5A-FGR
4-6.3.2-2 Primary/Secondary IDE Master/Slave and Third IDE Master/
Slave
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave
If any IDE device is detected in any one of the above items press <Enter>
to reveal the IDE information:
Primary/(Secondary/Third/Fourth) IDE Master/(Slave)
Primary/(Secondary/Third/Fourth) IDE Master/(Slave)
Device
Vendor
Size
LBA Mode : Supported
Block Mode : 16Sectors
PIO Mode
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-5
S.M.A.R.T. : Supported
Type
LBA/Large mode
Block (Multi-Sector Transfer)
PIO Mode
S.M.A.R.T.
32Bit Data Transfer
Type
To select the types of the IDE devices:
Not Installed;
Auto: Setting type automatically
CD-ROM: ATAPI (Packet Interface) CD-ROM drive
ARMD: ATAPI Removable Media Device
LBA/Large mode
To select or disable LBA/Large mode.
Block (Multi-Sector Transfer)
To select or disable Block Mode. The data transfer from and to the device occurs one
sector or multiple sectors at a time.
PIO Mode
To select or disable PIO Mode.
Choices: Disabled; 1, 2, 3, 4
DMA Mode
To select DMA Mode.
Choices: Auto; SWDMAn; MWDMAn; UDMAn
S.M.A.R.T
Allows you to enable / disable the Self Monitoring Analysis and Reporting Technology for the
hard disk.
32Bit Data Transfer
To auto-select (default) or disable 32Bit Data Transfer.
: Hard Disk
: WDC WD400BB-00DEA0
: 40.0GB
: 4
Hard Disk
ATAPI CDROM
Not Detected
Not Detected
Not Detected
Not Detected
Auto
Auto
Auto
Auto
Auto
Disabled
57
Chapter 4 BIOS Setup
Help Item
Select the type of device
connected to the system.