2-9.3 Jfsb3: Memory Turbo Mode; 2-9.4 Ljp1: Lan Controller Select (865G3-L Only); 2-9.5 Jkb1: Keyboard / Mouse Wake Up - SOLTEK SL-865G3 Manual

SL-865G3 / 865G3-L

2-9.3 JFSB3: Memory Turbo Mode

JFSB3 is designed on board for improving
Memory performance. If you want to obtain
better system performance, you can set
JFSB3 2-3 closed to enable the Memory
Turbo Mode. Otherwise, you can set JFSB3
1-2 closed to disable the Memory Turbo
Mode.

2-9.4 LJP1: LAN Controller Select (865G3-L only)

LJP1 is a 3-pin jumper for enabling or
disabling the on-board LAN Controller.
LPT1 for Realtek 8100C is built at a dif-
ferent location from LPT1 for RTL8101L.
Yet both two do the same function. User
can set LJP1 1-2 closed to enable the
on-board LAN Controller so as to set up
the LAN driver, or set LJP1 2-3 closed
to disable the on-board LAN Controller.
Whether LJP1 is enabled or not, it is still
free for user to add an add-on PCI LAN
card for networking.

2-9.5 JKB1: Keyboard / Mouse Wake Up

JKB1 is designed on board as a jumper
to enable/disable the PS/2 keyboard/
mouse Wake Up from suspend mode.
USB keyboard/mouse Wake Up func-
tion is not supported on this mainboard.
Chapter 2 Hardware Setup
Memory Turbo Mode
1
Turbo Mode Disabled
1
Turbo Mode Enabled
(on 865G3-L only)
LJP1
LAN Controller Select
( for Rtl8100C)
1-2 closed
1
LAN controller Enabled
1
LAN controller Disabled
Keyboard / Mouse
Wake Up
1-2 closed (default)
1
1
21
JFSB3
1-2 closed
(default)
2-3 closed
(default)
2-3 closed
JKB1:
Disabled
2-3 closed
Enabled