2-9.3 Ljp1: Lan Controller Select (86Sp2-L Only); 2-9.4 Jkb1: Kb / Mouse Power On / Wake Up - SOLTEK 86SP2 Manual

86SP2 / 86SP2-L

2-9.3 LJP1: LAN Controller Select (86SP2-L only)

LJP1 is a 3-pin jumper for enabling or disabling the on-board LAN
Controller. Users can set LJP1 1-2 closed to enable the on-board LAN
Controller so as to set up the LAN driver, or to set LJP1 2-3 closed to
disable the on-board LAN Controller. No matter LJP1 is enabled or
disabled, users are free to use an add-on PCI LAN card for networking.

2-9.4 JKB1: KB / Mouse Power On / Wake Up

JKB1 is designed on board as a jumper to enable/disable the PS/2 key-
board/mouse Power On/Wake Up from system off or suspend mode.
Yet user should still enter BIOS setup to choose the Wake Up/ Power
On mode.
USB keyboard/mouse Wake Up function is not supported on this
mainboard.
LJP1
LAN Controller Select
(86SP2-L only)
(default)
1-2 closed
LAN controller Enabled
1
2-3 closed
1
LAN controller Disabled
JKB1:
KB / Mouse
Power On / Wake Up
1-2 closed (default)
KB/Mouse Power On &
1
Wake Up Disabled
2-3 closed
KB/Mouse Power On &
1 Wake Up Enabled
30