2-9.1 Jbat1: Clear Cmos; 2-9.2 Jkb1 + J2 : Usb Keyboard / Mouse Wake Up - SOLTEK B9A-FGR Manual

2-9.1 JBAT1: Clear CMOS

When you have problem with rebooting your system, you can clear
CMOS data and restore it to default value. To clear CMOS with Jumper
JBAT1, please follow the steps below:
1. Power off system.
2. Set JBAT1 to Pin 2-3 closed.
3. After 2 or 3 seconds, restore the JBAT1 setting to Pin1-2 closed.
4. CMOS data are restored to default now. Remember never clear
CMOS when system power is on.

2-9.2 JKB1 + J2 : USB Keyboard / Mouse Wake Up

JKB1 is designed on board as a
jumper to enable/disable the USB
keyboard/mouse Wake Up from sus-
pend mode.
JBAT1:
Clear CMOS
1-2 closed
1
(default)
To hold data
1
2-3 closed
To clear CMOS
USB Keyboard / Mouse Wake Up
1
J2
1
J2
27
Chapter 2 Hardware Setup
JKB1 + J2 :
1
1-2 closed (default)
Disabled
JKB1
1
2-3 closed
Enabled
JKB1