Advertisement
„ Audio
Sound Retriever:
Improve the quality of the compressed audio. Playback sound
of lossy compressed files such as MP3 will be improved. The setting can be
separately set to each input selector. The setting is effective in the signals of
48 kHz or less. The setting is not effective in the bitstream signals.
• It cannot be set if the listening mode is Direct or Pure Direct.
• This cannot be selected when either of the slots is selected with "Dirac Live"
( →p93).
Midnight:
Make small sounds easily heard. It is useful when you need to reduce
the volume while watching a movie late night.
• It cannot be set if the listening mode is Direct or Pure Direct.
• The setting cannot be used in the following cases.
– If "Loudness Management" is set to "Off" when playing Dolby Digital Plus
or Dolby TrueHD
– When the input signal is DTS:X and "Dialog Control" is other than 0 dB
Stereo Assign:
This function enables you to select a pair of speakers to output
stereo sound. Apart from the front speakers (Front), you can select the Surround
speakers (Surround), Surround Back speakers (Surround Back), Height 1
speakers (Height 1), and Height 2 speakers (Height 2).
Selectable
"Front"
• The listening mode switches to "Stereo" if the audio output destination is
changed.
Zone B:
(A+B)" and "On (B)".
• In the following cases, "Zone B" cannot be selected.
– When ZONE 2 is On
– When "System Setup" - "Speaker" - "Configuration" - "Zone 2 Preout"
( →p136) on the Home screen is set to "Zone 2"
Auto Phase Control+:
discs not made according to phase control standards. This function corrects
the phase shift when playing such discs. When "Auto" is selected, in addition
to the low frequency delay, the polarity and correlation are also detected and
corrected.
• It cannot be set if the listening mode is Pure Direct.
• This cannot be selected when either of the slots is selected with "Dirac Live"
( →p93).
AV Direct Mode:
circuits and thereby suppressing the noise that is generated by them. ( →p115)
Dialog Lifted Up:
make it easier to hear dialog in movies or give more prominence to the vocals in
music. If you are using front high speakers, you can select from "1" (low) to "4"
(high).
• The function cannot be set in the following cases.
– When the Front High speakers are not enabled
– When the DIALOG button ( →p19) function is being used
– When "Dialog Control" ( →p142) has been set
– When the listening mode is Direct or Pure Direct
"Surround"
Select a method of outputting audio to ZONE B from among "Off", "On
The low frequencies are recorded with a delay for some
Sound quality can be improved by limiting the activity of digital
By adjusting the localization of the center elements, you can
Playback
92
Advertisement
