Advertisement
Speaker
„ Crossover
Set what number of Hz in the low frequency range is output from each speaker
and what should be output from the subwoofer. When a subwoofer is not to be
used, set to "Full Band" so that the bass is output from the speakers.
• When Dirac Live Bass Control ( →p182) is used, the crossover frequency
setting made here is not available. Set using Pioneer Remote App ( →p181).
‰ Dirac Live Bass Control (Default Value: Off)
Use the Dirac Live Bass Control to adjust the crossover frequency.
On
When using Dirac Live Bass Control. This can be selected
when Dirac Live Bass Control measurements are performed.
Off
When this function is to not be used
‰ Setting Type (Default Value: Common)
Set the crossover frequency to suit the speakers.
Common
Set a common crossover frequency for each speaker channel.
Set "Small" or "Large" for each speaker channel.
Individual
Set individual crossover frequencies for each speaker channel.
You can set starting at 40Hz, referencing the crossover
frequency for each speaker.
Front
(Default Value: Small/80 Hz)
Center
(Default Value: Small/80 Hz)
Height 1
(Default Value: Small/80 Hz)
Height 2
(Default Value: Small/80 Hz)
Surround
(Default Value: Small/80 Hz)
Surround Back
(Default Value: Small/80 Hz)
Crossover
(Default Value: 80 Hz)
LPF of LFE
(Default Value: 120 Hz)
(Default Value: Off)
Double Bass
• This setting is disabled when the IMAX sound mode has been applied.
However, when the "IMAX User Setting" ( →p142) is "Manual" (default value
is Auto), it is enabled.
Front:
When the "Setting Type" is "Common" ( →p137)
Set according to the speakers to be used.
"Small": When not using floor standing front speakers.
"Large": When using floor standing front speakers.
• If "Configuration" - "Subwoofer" is set to "No", "Front" will be fixed to "Large"
and the low pitched range of the other channels will be output from the front
speakers. Refer to the instruction manual of your speakers to make the
setting.
When the "Setting Type" is "Individual" ( →p137)
Set how many Hz for the range of each channel, with crossover frequencies
selectable between "40 Hz" and "200 Hz".
"Full Band": Full band will be output.
• If the setting for "Configuration" - "Subwoofer Preout" or "Passive
Subwoofer" is "No", the setting for "Front" is fixed to "Full Band" and the
low frequency range for each of the other speakers is output from the front
speakers. Refer to the instruction manual of your speakers to make the
setting.
Setup
137
Advertisement
