Pioneer ELITE VSX-LX104 Instruction Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Stereo Receiver
  5. Elite VSX-LX104
  6. Instruction manual

Pioneer ELITE VSX-LX104 Instruction Manual

Hide thumbs Also See for ELITE VSX-LX104:
Table of Contents

Advertisement

Quick Links

Instruction
Manual
VSX-LX104
AV RECEIVER
En
Table of contents
Connections
- Connecting Speakers
Playback
Setup
Troubleshooting
Appendix
Supplementary Information
Front Panel≫ Rear Panel≫ Remote≫
≫
≫
≫
≫
≫
≫
≫
≫

Advertisement

Table of Contents
loading

Related Manuals for Pioneer ELITE VSX-LX104

Summary of Contents for Pioneer ELITE VSX-LX104

  • Page 1 Instruction ≫ Table of contents Manual ≫ Connections VSX-LX104 ≫ - Connecting Speakers AV RECEIVER ≫ Playback ≫ Setup ≫ Troubleshooting ≫ Appendix ≫ Supplementary Information Front Panel≫ Rear Panel≫ Remote≫...

  • Page 2: Table Of Contents

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box Connecting an AV Component in a Separate Room (Multi-zone Connection) Additional Function (Firmware Update) Connecting a TV (ZONE 2) Update Information of the firmware Connecting ZONE B Operation of added new functions Connecting a Pre-main Amplifier (ZONE B) Firmware Update Procedure Connecting Antennas...
  • Page 3 Contents Connections Playback Setup ≫ ≫ ≫ ≫ FlareConnect Listening To the AM/FM Radio Playing Back Tuning into a Radio Station USB Storage Device Presetting a Radio Station Multi-zone Basic Operations Device and Supported Format Playing Back Playing back files on a PC and NAS (Music Server) ZONE B Playback Windows Media Player settings...

  • Page 4: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting Audio Adjust Source When the unit is operating erratically Hardware Troubleshooting Multi Zone Appendix Miscellaneous MCACC Reducing the Power Consumption in Standby State 146 Menu operations About HDMI Full Auto MCACC General Specifications Manual MCACC MCACC Data Check...

  • Page 5: What's In The Box

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box 1. Main unit (1) 2. Remote controller (RC-974R) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) • Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) 6.

  • Page 6: Additional Function (Firmware Update)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Additional Function (Firmware Update) This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may be switched to the updated one.

  • Page 7: Firmware Update Procedure

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Firmware Update Procedure The update may take approx. 20 minutes to complete via network or via USB Update port. Existing settings are guaranteed in either updating method. 1. Press When this unit is connected to the network, notifications of firmware updates may The Home screen is displayed on the TV screen.
  • Page 8 Contents Connections Playback Setup ≫ ≫ ≫ ≫ If an Error Message is Displayed • If "HDMI CEC" is set to "On", set it to "Off". If an error occurs, "- Error!" is displayed on the display of the unit. ("" –...
  • Page 9 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 6. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via the firmware file is for another model. Retry from the download of the firmware USB" with the cursors in order, then press ENTER. file.

  • Page 10: Part Names

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Part Names Front Panel ❏ For details, see ( p11) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 11 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. INPUT SELECTOR dial: Switch the input to be played. 17. TUNER button: Switches the input to be played to "TUNER". Also, pressing 2. DIMMER button: You can switch the display off or adjust the brightness of the this button repeatedly switches the input between "AM"...

  • Page 12: Display

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Display 9 bk 1. This may light when performing operations with the "NET", "USB" input 5. Displays the audio output destination. selector. A: Outputs audio only to ZONE A. 2. Lights in the following conditions. B: Outputs audio only to ZONE B.

  • Page 13: Rear Panel

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Rear Panel 90° 180° ❏ For details, see ( p14) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 14 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. ANTENNA AM LOOP/FM UNBAL 75 Ω terminal: The supplied antennas are connected.

  • Page 15: Remote Controller

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Remote Controller STANDBY/ON button 2. PERSONAL PRESET 1/2/3 buttons: Registers the current setting conditions  such as input selector, listening mode, etc. or call the registered settings.  p76)  3. Input selector buttons: Switches the input to be played. ...
  • Page 16 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 21. MODE button: Switches between automatic tuning and manual tuning for AM/FM stations ( p69). Also, when an HDMI CEC function-enabled AV component is connected to this unit, you can switch "4. Play buttons" between "CEC MODE"...

  • Page 17: Connections

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connections Connecting speakers Connecting the TV Connecting Playback Devices Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting ZONE B Connecting Antennas Network Connection Connecting External Control Devices Connecting the Power Cord Front Panel≫...

  • Page 18: Connecting Speakers

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting speakers You can select the layout of speakers to be installed from various patterns when using this unit. Use the following flow chart to select the speaker layout that suits your speakers and usage environment.

  • Page 19: Speaker Installation

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Installation „ 5.1 Channel System This is a basic 5.1 Channel System. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals.
  • Page 20 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System This is a 7.1 Channel System that consists of the basic 5.1 Channel System p19) and added surround back speakers. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals.
  • Page 21 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System A 5.1.2 Channel System is a speaker layout consisting of the basic 5.1 Channel System ( p19) and added height speakers. Select the height speakers that suit your speakers and usage environment from the following three types. ❏...
  • Page 22 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Front High Speakers/Rear High Speakers This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, Installation Example and added front high speakers or rear high speakers combined.
  • Page 23 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Ceiling Speakers Installation Example This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and added top front speakers or top middle speakers or top rear speakers combined. Installing the height speakers will enrich the sound field feeling in the upper space.
  • Page 24 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Dolby Enabled Speakers (Dolby Speakers) This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and Installation Example added Dolby enabled speakers (front) or Dolby enabled speakers (surround) combined.

  • Page 25: Speaker Connections And "Speaker Setup" Settings

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Connections and "Speaker Setup" Settings Connections „ (Note) Speaker Impedance Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance"...
  • Page 26 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Connect the Subwoofer a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack.
  • Page 27 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System "Speaker Setup" settings during „ Initial Setup ( p132) Speaker Setup 5.1 ch Speaker Impedance 6 ohms or above • Speaker Channels: 5.1 ch • Subwoofer: • Height Speaker: •...
  • Page 28 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p132) Speaker Setup 5.1 ch Zone 2 Speaker Impedance 6 ohms or above • Speaker Channels: 5.1 ch ZONE 2 •...
  • Page 29 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System (Bi-Amping the Speakers) "Speaker Setup" settings during „ Initial Setup ( p132) Speaker Setup 5.1 ch Speaker Impedance 6 ohms or above • Speaker Channels: 5.1 ch • Subwoofer: •...
  • Page 30 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System "Speaker Setup" settings during „ Initial Setup ( p132) Speaker Setup Speaker Impedance 6 ohms or above • Speaker Channels: 7.1 ch • Subwoofer: • Height Speaker: • Zone Speaker: •...
  • Page 31 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p132) Speaker Setup Zone 2 Speaker Impedance 6 ohms or above • Speaker Channels: 7.1 ch ZONE 2 •...
  • Page 32 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System "Speaker Setup" settings during „ Initial Setup ( p132) Speaker Setup 5.1.2 ch Front High Speaker Impedance 6 ohms or above • Speaker Channels: 5.1.2 ch • Subwoofer: •...
  • Page 33 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p132) Speaker Setup 5.1.2 ch Front High Zone 2 Speaker Impedance 6 ohms or above •...

  • Page 34: Speaker Combinations

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker combinations • Up to two powered subwoofers can be connected in either combination. SURROUND ZONE 2 Speaker Channels FRONT CENTER SURROUND HEIGHT Bi-AMP BACK (ZONE SPEAKER) 2.1 ch (*1) (*1) 3.1 ch (*1) (*1) 4.1 ch...

  • Page 35: Connecting The Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the TV Connect this unit between a TV and AV component. Connecting this unit with the TV can output the video and audio signals of the AV component to the TV, or play the audio of the TV on this unit.

  • Page 36: To Arc Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ To ARC TV If the TV supports the ARC (Audio Return Channel) function (*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection.

  • Page 37: To Non-Arc Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ To Non-ARC TV If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. • If you use a cable set-top box, etc. connected to the input jack of this unit to watch TV (without using a TV’s built-in tuner), connection with a digital optical cable or analog audio cable is not required.

  • Page 38: Connecting Playback Devices

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.

  • Page 39: Connecting An Audio Component

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using a digital coaxial cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack.

  • Page 40: Connecting An Av Component In A Separate Room (Multi-Zone Connection)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting a TV (ZONE 2) While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on the TV equipped with an HDMI IN jack in a separate room (ZONE 2).

  • Page 41: Connecting Zone B

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting ZONE B Connecting a Pre-main Amplifier, etc. (ZONE B) While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source at the same time with the pre-main amplifier or the transmitter of the wireless headphones connected to the ZONEB LINE OUT jack.

  • Page 42: Connecting Antennas

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Antennas Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape. a Indoor FM antenna, b AM loop antenna Front Panel≫...

  • Page 43: Network Connection

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network connection. If connection is made by the wired LAN, connect the router and the NETWORK jack with the LAN cable as shown in the illustration.

  • Page 44: Connecting External Control Devices

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting External Control Devices IR IN port When connecting a remote control receiver unit consisting of an IR Receiver, etc. to this unit, operation using the remote controller is possible even if the remote control signal is difficult to reach (due to installation in the cabinet, etc.).

  • Page 45: Trigger Out Jack

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 12V TRIGGER OUT jack When connecting a device equipped with a TRIGGER IN jack such as a BD/DVD player to this unit, the device can be turned on or set to standby by interlocking the operation on this unit.

  • Page 46: Connecting The Power Cord

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the Power Cord Connect the power cord after all the connections are completed. • This unit includes a removable power cord. Be sure to connect the power cord to the AC IN of the unit first, and then connect it to the outlet. Always disconnect the outlet side first when disconnecting the power cord.

  • Page 47: Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playback AV Component Playback BLUETOOTH Playback ® Internet Radio Spotify AirPlay ® DTS Play-Fi ® FlareConnect USB Storage Device Playing back files on a PC and NAS (Music Server) Play Queue Amazon Music Connecting your Unit to a Sonos System Listening To the AM/FM Radio Multi-zone...

  • Page 48: Av Component Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the HDMI MAIN/SUB button or "AV Adjust" ( p128) to switch between MAIN and SUB.

  • Page 49: Bluetooth Playback

    If a password is requested, enter "0000". • This unit is displayed as "Pioneer VSX-LX104 XXXXXX". This display can p125) or the Pioneer be changed with the Friendly Name function ( Remote App (can be used with the iOS or Android™).

  • Page 50: Internet Radio

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services, such as TuneIn Radio, etc. • To play Internet radio services, the network needs to be connected to the Internet. •...
  • Page 51 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing ENTER will display the menu on the screen.

  • Page 52: Spotify

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. Front Panel≫ Rear Panel≫ Remote≫...

  • Page 53: Airplay

    Confirm that this unit and the PC are connected to the same network beforehand. Then, press NET on this unit. Next, click the AirPlay icon iTunes, select this unit from the displayed devices, and start play of a music file. iPhone Pioneer VSX-LX104 XXXXXX e.g., iOS 10 Front Panel≫ Rear Panel≫ Remote≫...

  • Page 54: Dts Play-Fi

    "Group playback" that plays the same music in separate • To use a music streaming distribution service, user registration may be rooms at home. To enjoy this function, download Pioneer Music Control App required. (available on iOS or Android™).
  • Page 55 The illustration shows an image. 2. Download Pioneer Remote App from App Store or Google Play™ Store. 3. Connect the mobile device to the network where this unit is connected. 4. Starting up Pioneer Remote App will automatically recognize compatible devices.
  • Page 56 Contents Connections Playback Setup ≫ ≫ ≫ ≫ USB Storage Device You can play music files stored on a USB storage device. Basic Operations Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2.
  • Page 57 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • To return to the previous screen, press • To display an album title, artist name and album art of a file in WAV format, make the folder structure and file names as shown below when saving music files.
  • Page 58 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Device and Supported Format USB Storage Device Requirements WAV (.wav/.WAV): WAV files contain uncompressed PCM digital audio. • This unit can use USB storage devices that comply with the USB mass • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz storage class standard.
  • Page 59 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing back files on a PC and NAS (Music Server) Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers supported by this unit are PCs that incorporate players equipped with the server functions such as Windows Media Player 11 or 12, or NASes ®...
  • Page 60 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2. Start the server (Windows Media Player 11, Windows Media Player 12, or ®...
  • Page 61 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • Depending on the server sharing settings, contents stored on the server 2. In the "Stream" menu, select "Turn on media streaming" to display a dialog may not be displayed. box. 7. With the cursors, select the music file to play, and then press ENTER to start •...
  • Page 62 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • Depending on the version of Windows Media Player, the names of items to ® select may differ from the above description. ❏ Supported Audio Formats ( p63) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 63 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats This unit supports the following music file formats. Remote play of FLAC and Apple Lossless (.m4a/.mp4/.M4A/.MP4): DSD is not supported. • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz •...
  • Page 64 1. Connect this unit to your home network by the network settings on this unit. 2. Download Pioneer Remote App from App Store or Google Play™ Store. 3. Connect the mobile device to the network where this unit is connected.
  • Page 65 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If there are no tracks on the Play Queue list, only "Play Now " is 3. To delete a track, slide the track to the left until the trash icon changes to " ".
  • Page 66 Tap the unit when displayed to select it. selector on the remote controller to display the Network menu and select 5. Tap "NET" or "NETWORK" at the top of the Pioneer Remote App screen, and "Amazon Music" from the menu.
  • Page 67 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting your Unit to a Sonos System Setting up your Unit to work with the Once your unit is connected to the Sonos Connect you will be able to send any music or source on your Sonos App to the unit. By going through the Sonos Sonos Connect Connect, you can play your unit through other Sonos devices in the network in the same group, or you can just play on your unit.
  • Page 68 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Now the fun part - listening to Sonos on your Unit 1. Using your Sonos App select the music you want to listen to and send it to the room (or group) where your unit is located. We recommend naming your unit / Sonos Connect combination a friendly name like TV Room or Living Room where the equipment is located.
  • Page 69 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening To the AM/FM Radio You can receive AM and FM radio stations on this unit with the built-in tuner. Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1.
  • Page 70 Contents Connections Playback Setup ≫ ≫ ≫ ≫ When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( p70). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception.
  • Page 71 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure.
  • Page 72 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Selecting a Preset Radio Station 1. Press TUNER. 2. Press the cursors to select a preset number. Deleting a Preset Radio Station 1. Press TUNER. 2. Press the cursors to select the preset number to delete. 3.
  • Page 73 "BLUETOOTH". You cannot select different stations of AM/FM broadcasts for the main room and separate room. Pioneer Remote App is useful for the multi-zone playback operation. Download Pioneer Remote App (available on iOS or Android™) to a mobile device, such as a smartphone and tablet to use it.
  • Page 74 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back In the remote controller operation, while pressing and holding the ZONE 2 SHIFT button on the remote controller, operate with each button. 1. Point the remote controller at the unit, and while pressing and holding the ZONE 2 SHIFT button on the remote controller, press .
  • Page 75 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ZONE B Playback While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifier, etc. (ZONE B) p41) connected to the ZONE B LINE OUT jack at the same time. Playing Back 1.
  • Page 76 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Convenience functions Using PERSONAL PRESET Registration You can register settings ( p77) such as the current input selector and listening mode with the three PERSONAL PRESET buttons, and call a registered setting in a single operation. e.g.) Pressing the PERSONAL PRESET button will automatically switch the input selector to "TUNER"...
  • Page 77 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Settings that can be registered The following settings can be registered with PERSONAL PRESET. – Input selector (Network service or AM/FM radio stations can also be registered.) – Listening mode – Volume level (Upper limit "-32 dB") (When ZONE 2 is on, the volume level of ZONE 2 is also registered.) –...
  • Page 78 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Adjusting the tone Adjusting TREBLE/BASS You can adjust the sound quality of the speakers. 1. Press TONE repeatedly to select Treble or Bass and adjust the content. Treble: Enhances or moderates the high-tone range of the speakers. Bass: Enhances or moderates the low-tone range of the speakers.
  • Page 79 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Adjusting SUBWOOFER Adjust the speaker level of the subwoofer while listening to the sound. 1. Press SW. 2. Press + or - to adjust the level between "-15.0 dB" and "+12.0 dB". •...
  • Page 80 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Sleep Timer You can allow the unit to enter standby automatically when the specified time has elapsed. Press SLEEP button on the remote controller to select the time from "30 min", "60 min" and "90 min". "Off": The unit does not automatically enter standby mode.
  • Page 81 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode You can change the listening mode during play by pressing repeatedly "AUTO/DIRECT", "SURR", or "STEREO". Selecting a Listening mode • Each of AUTO/DIRECT, SURR, and STEREO buttons stores the listening mode that was selected last.
  • Page 82 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ AUTO/DIRECT button „ SURR button Press repeatedly and the listening modes suited to the input signal are switched By pressing repeatedly you can select the audio format of the signals being input between "Auto Surround", "Direct", and "Pure Direct".
  • Page 83 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Checking the input format and listening mode Pressing repeatedly will switch the display of the main unit in the following order. • The display content for the BLUETOOH input is different. • Not all the information is necessarily displayed. Input source and volume Listening mode Input format...
  • Page 84 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Speaker layout Listening mode 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch...
  • Page 85 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker layout Listening mode 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.2 ch (*3) (*3) (*3) ES Discrete (DTS-ES Discrete) ES Matrix (DTS-ES Matrix) DTS 96/24 (*3) (*3)
  • Page 86 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker layout Listening mode 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.2 ch (*1) (*1) (*1) (*1) (*1) (*3) (*3) (*3) (*3) (*1) (*1)
  • Page 87 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode Effects Updating of listening modes Atmos „ Listening modes such as DTS Virtual:X, Atmos 2.0 and DSur 2.0 are (Firmware version supporting Atmos 2.0, etc.) added when the firmware is updated after purchase or the firmware is switched Since this mode calculates the positional data of audio recorded in Dolby Atmos in the product production process.
  • Page 88 Contents Connections Playback Setup ≫ ≫ ≫ ≫ DD (Dolby Audio - DD) • This mode cannot be selected when DTS signal is input. „ According to the speaker layout, the following listening modes are displayed. This mode faithfully reproduces the sound design recorded in the Dolby Digital –...
  • Page 89 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ DSD possible to record a maximum of 7.1 channels with additional channels such as the surround back channel. It also supports low bit rates. This mode is suitable for playing sources recorded in DSD. •...
  • Page 90 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Ent.Show (Entertainment Show) This mode can be selected in any speaker layout such as front speakers-only connection. You can enjoy your favorite movies or TV programs with a more Suitable for rock or pop music. Listening to music in this mode creates a lively immersive audio experience.
  • Page 91 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Unplugged Suitable for acoustic instruments, vocals and jazz. This mode emphasizes the front sound field image, giving the impression of being in front of the stage. Front Panel≫ Rear Panel≫ Remote≫...
  • Page 92 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Formats and Selectable Listening Modes „ Selectable listening modes You can select a variety of listening modes Input Format Listening Mode according to the audio format of the signal to be Stereo input.
  • Page 93 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Multich PCM Stereo Stereo Atmos Stereo Atmos *1 *2 DSur DSur Classical DTS Neural:X DTS Neural:X Unplugged DTS Virtual:X DTS Virtual:X Ent.Show *2 *3 *3 *4...
  • Page 94 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Stereo Stereo DTHD Stereo DTHD *1 *2 *1 *2 *3 *1 *2 DSur DSur DSur Classical Classical Classical Unplugged Unplugged Unplugged Ent.Show Ent.Show...
  • Page 95 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Stereo DTS 96/24 Stereo DTS Express Stereo DTS 96/24 DTS Express *1 *2 *1 *2 *1 *2 DTS Neural:X DTS Neural:X DTS Neural:X DTS Virtual:X DTS Virtual:X...
  • Page 96 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS-HD HR Stereo DTS-HD MSTR Stereo DTS-ES Stereo DTS-HD HR DTS-HD MSTR *1 *2 *1 *2 DTS Neural:X DTS Neural:X ES Matrix DTS Virtual:X DTS Virtual:X...
  • Page 97 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode DTS:X Stereo DTS:X DTS Virtual:X *1 *2 Classical Unplugged Ent.Show Drama AdvancedGame Action Rock/Pop Sports Ext.Stereo Ext.Mono F.S.Surround Cannot be selected if "Speaker Virtualizer" is set to "Off". Cannot be selected when height speakers are installed.
  • Page 98 Contents Connections Playback Setup ≫ ≫ ≫ ≫ System Setup Menu list You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations" ( p100). Input/Output TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
  • Page 99 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Hardware HDMI Change the settings for the HDMI functions. p111 Power Management Change the settings for the power-save function. p113 12V Trigger Set the 12V trigger output setting to each input. p114 Works with SONOS Change the settings to connect with the Sonos Connect.
  • Page 100 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Menu operations Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Home screen, then select System Setup with the cursors on the remote controller and press ENTER. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection.
  • Page 101 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input/Output Assign Setting Item Default Value Setting Details 1080p -> 4K When using a TV that supports 4K, video signals „ TV Out / OSD Upscaling input at 1080p can be automatically upscaled to 4K for output.
  • Page 102 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Digital Audio Input Setting Item Default Value Setting Details Screen Saver 3 minutes Set the time to start the screen saver. Change input assignment between the input selectors and DIGITAL IN COAXIAL/ Select a value from "3 minutes", "5 minutes", OPTICAL jacks.
  • Page 103 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Analog Audio Input Setting Item Default Value Setting Details Set whether to skip the AUX input selector. Select Change input assignment between the input selectors and AUDIO IN jacks. If you "Skip"...
  • Page 104 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Setting Item Default Value Setting Details Listening Mode Displays the listening mode that has been set. „ Configuration Volume Displays the volume level that has been set. (Upper limit "-32 dB") Change the settings of connection environment of the speakers.
  • Page 105 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Crossover Setting Item Default Value Setting Details Bi-Amp Set whether the front speakers are bi-amp Change the settings of crossover frequencies. connected. "No": When front speakers are not bi-amp Setting Item Default Value Setting Details connected...
  • Page 106 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Distance Setting Item Default Value Setting Details Surround Small Set the low range capabilities for each channel by Set the distance from each speaker to the listening position. setting either small or large. "Small": For small speakers whose low range Setting Item Default Value...
  • Page 107 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Channel Level Setting Item Default Value Setting Details Surr Back Right 0.0 dB Select a value between "-12.0 dB" and "+12.0 dB" Adjust the volume level of each speaker. (in 0.5 dB increments). A test tone will be output each time you change the value.
  • Page 108 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Audio Adjust „ Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. „ Dual Mono/Mono Setting Item Default Value Setting Details Change the settings of multiplex audio playback. Dolby Enabled 6.0 ft/1.80 m Set the distance between the Dolby Enabled Speaker to Ceiling Speaker and the ceiling.
  • Page 109 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Source „ Volume Change the Volume settings. „ Input Volume Absorber Setting Item Default Value Setting Details Adjust the volume level when there are differences in volume level among Mute Level -∞ dB Set the volume lowered from the listening volume multiple devices connected to this unit.
  • Page 110 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Name Edit „ Audio Select Set an easy name for each input. The set name appears on the main unit’s Select the priority for input selection when multiple audio sources are connected display.
  • Page 111 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Hardware Setting Item Default Value Setting Details Fixed PCM Select whether to fix input signals to PCM (except „ HDMI multi-channel PCM) when you select "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" Change the settings of the HDMI function.
  • Page 112 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details HDMI Standby When this is set to anything other than "Off", Audio TV Out You can enjoy audio through the speakers of the Through you can play the video and audio of an HDMI- TV while this unit is on.
  • Page 113 20 minutes of inactivity without turn on the power of the unit via network using an any video or audio input. (When "USB Power Out application such as Pioneer Remote App that can at Standby" or "Network Standby" is enabled, the control this unit.
  • Page 114 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 12V Trigger Setting Item Default Value Setting Details Bluetooth Wakeup Off This function wakes up the unit on standby by Set when outputting the control signal (maximum 12 V/100 mA) through the 12V connecting a BLUETOOTH-enabled device.
  • Page 115 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details HDMI 6 Set the 12V trigger output setting to each input. Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "HDMI 6"...
  • Page 116 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Works with SONOS Setting Item Default Value Setting Details Preset Volume Main: You can set the volume beforehand for playing Change the settings to connect with the Sonos Connect. Last back the Sonos Connect. You can set volumes Zone 2: for the main room (where this unit is located) and Setting Item...
  • Page 117 Remote ID Select an ID for the unit's remote controller from Change the settings for remote play. "1", "2", and "3" to prevent interference between the unit and other Pioneer components that are Setting Item Default Value Setting Details installed in the same room. After changing the ID...
  • Page 118 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Firmware Update „ Lock Change the settings for Firmware Update. Lock the Setup menu so that the settings cannot be changed. Setting Item Default Value Setting Details Setting Item Default Value Setting Details Update Notice Enable...
  • Page 119 Contents Connections Playback Setup ≫ ≫ ≫ ≫ MCACC Menu operations Setup the speakers automatically or make desired changes to the equalizer. You can also check the values set currently for each speaker setting. Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Home screen, then select MCACC with the cursors on the remote controller and press ENTER.
  • Page 120 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Full Auto MCACC 2. Place the supplied speaker setup microphone in the listening position, and connect to the SETUP MIC jack on the main unit. Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position.
  • Page 121 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Manual MCACC Setting Item Default Value Setting Details Height Left 0.0 dB After selecting the speaker frequency from between „ EQ Adjust "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB"...
  • Page 122 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Surround Right 0.0 dB After selecting the speaker frequency from between Surr Back Left 0.0 dB After selecting the speaker frequency from between "63 Hz"...
  • Page 123 Contents Connections Playback Setup ≫ ≫ ≫ ≫ MCACC Data Check You can check the number of speaker channels connected and the content and values you have set for each of the speaker settings. „ Speaker Setting You can check the number of speaker channels connected and the large and small settings you have set for the low range reproduction capabilities for each of the speakers.
  • Page 124 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Network/Bluetooth Menu operations Make settings related to network connections and BLUETOOTH. Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Home screen, select Network/ Bluetooth with the cursors on the remote controller, then press ENTER.
  • Page 125 "DHCP" to "Disable" and assign an address Friendly Name Pioneer VSX- Change the device name for this unit which is to this unit in "IP Address" as well as set information related to your LAN, such...
  • Page 126 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Bluetooth Setting Item Default Value Setting Details AirPlay Password - You can set a password of up to 31 characters so that only registered users can use AirPlay ® Setting Item Default Value Setting Details 1.
  • Page 127 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Pairing You can initialize the pairing information saved on Information this unit. Pressing ENTER when "Clear" is displayed initializes the pairing information stored in this unit. •...
  • Page 128 Contents Connections Playback Setup ≫ ≫ ≫ ≫ AV Adjust Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen while playing something. Press on the remote controller to display the AV Adjust menu. Note that there is no display on the TV screen when the input selector is "AUX", "CD", "TV", "PHONO", "FM", or "AM", so follow the main unit’s display while doing the operations.
  • Page 129 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Subwoofer: Adjust the speaker level of the subwoofer while listening to the DRC: Make small sounds easily heard. It is useful when you need to reduce the sound. volume while watching a movie late night. You can enjoy the effect only when •...
  • Page 130 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Web Setup Menu operations You can make the settings for the network function of this unit using an Internet Network Connection: You can select a network connection method. If you select browser on a PC, smartphone, etc. "Wireless", select an access point from "Wi-Fi Setup"...
  • Page 131 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Initial Setup with Auto Start-up Wizard Operations When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for TV’s REMOTE startup using simple operations following on-screen guidance.
  • Page 132 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If you have terminated the Initial Setup halfway, turn this unit to standby mode. • If you connect a subwoofer, check the power and volume of the subwoofer. Then turning the power on again can display the Initial Setup again. Set the subwoofer volume to more than half.
  • Page 133 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 4. Network Connection Make the network connection settings. There are two methods for network connection. "Wired": Use a wired LAN to connect to a network. "Wireless": Wi-Fi connection using an access point such as a wireless LAN router.
  • Page 134 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Tuner „ BLUETOOTH function Before starting the procedure „ Network function Problems may be solved by simply turning the power on/off or disconnecting/ „ USB storage device connecting the power cord, which is easier than working on the connection, setting and operating procedure.

  • Page 135: When The Unit Is Operating Erratically

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ When the unit is operating erratically ❏ Try restarting the unit Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the STANDBY/ON button of the main unit for at least 5 seconds, and then restart the unit.

  • Page 136: Resetting The Unit

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Resetting the unit (this resets the unit settings to the default) If the restart of the unit does not solve the problem, reset the unit, and restore all the settings to the factory default at the time of purchase. This may solve the problem. If the unit is reset, your settings are restored to the default values.

  • Page 137: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Power ❏ When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
  • Page 138 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ No sound from the TV • Change the input selector on this unit to the position of the terminal to which the TV is connected. • If the TV does not support the ARC function, along with the connection by an HDMI cable, connect the TV with this unit using a digital optical p37) cable.

  • Page 139: X84; Listening Modes

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ The beginning of audio received by an HDMI IN cannot be heard • Since it takes longer to identify the format of an HDMI signal than it does for other digital audio signals, audio output may not start immediately. ❏...

  • Page 140: X84; Video

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Video • Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. •...

  • Page 141: X84; Tuner

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Tuner ❏ Poor reception or much noise • Recheck the antenna connection. p42) • Move the antenna away from the speaker cord or power cord. • Move the unit away from your TV or PC. •...

  • Page 142: X84; Network Function

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Network function • If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up. • When the NET indicator is blinking, this unit is not properly connected to the home network. •...

  • Page 143: X84; Usb Storage Device

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ USB storage device ❏ USB storage device is not displayed • Check if the USB storage device or USB cable is securely inserted to the USB port of the unit. p56) •...

  • Page 144: X84; Zone B Function

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ ZONE B function ❏ Cannot output audio to ZONE B • To output audio to ZONE B, set the audio output destination for "Other" - "Zone B" on AV Adjust to "On(A+B)" or "On(B)". p75) „...
  • Page 145 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ The message "Noise Error" appears during Full Auto MCACC • This can be caused by a malfunction in your speaker unit. Check the speaker output, etc. ❏ The measurement results of Full Auto MCACC show different distances to the speakers from the actual ones •...
  • Page 146 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off". –...
  • Page 147 Contents Connections Playback Setup ≫ ≫ ≫ ≫ About HDMI Compatible functions transmitted to the TV. Deep Color: HDMI (High Definition Multimedia Interface) is a digital interface standard for By connecting devices supporting Deep Color, video signals input from the connecting TVs, projectors, Blu-ray Disc/DVD players, digital tuners, and other devices can be reproduced on the TV with even more colors.
  • Page 148 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats 2 ch linear PCM: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Multi-channel linear PCM: Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Bitstream: Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X, DTS-...
  • Page 149 Contents Connections Playback Setup ≫ ≫ ≫ ≫ General Specifications „ Amplifier Section Signal to Noise Ratio 106 dB (IHF-A, LINE IN, SP OUT) Rated Output Power (FTC) (North American) 80 dB (IHF-A, PHONO IN, SP OUT) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts Speaker Impedance per channel minimum RMS power, with no more than 0.08% total harmonic 4 Ω...
  • Page 150 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ BLUETOOTH Section Dimensions (W × H × D) 435 mm × 173 mm × 370.5 mm Communication system 17-1/8" × 6-13/16" × 14-9/16" BLUETOOTH Specification version 4.1+LE Weight Frequency band 9.4 kg (20.7 lbs.) 2.4 GHz band „...
  • Page 151 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Audio Inputs Digital OPTICAL (TV) COAXIAL (CD) Analog BD/DVD, CBL/SAT, STRM BOX, CD, PHONO, AUX (front) „ Audio Outputs Analog ZONE B LINE OUT 2 SUBWOOFER PRE OUT Speaker Outputs FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R or HEIGHT L/R, ZONE 2 L/R (North American models support banana plugs.) Phones PHONES (Front, ø...
  • Page 152 SN 29403637A_EN © 2019 Onkyo & Pioneer Corporation. All rights reserved. http://pioneer-audiovisual.com/privacy/ “Pioneer”, “ELITE” and “MCACC logo” are trademarks of Pioneer Corporation, and are used under license. H1904-1...

Table of Contents