Advertisement
Connecting a transmitter for playback
When you connect wireless headphones or a wireless speaker transmitter to the ZONE B LINE OUT jacks of this unit, you can play back the same source through the
wireless headphones or wireless speakers as in the main room.
Connections
1. Use an analog audio cable to connect the ZONE B LINE OUT jacks on this
unit to the input jacks on the transmitter.
a
Transmitter
a Analog audio cable
PRE OUT
OR
Setting Up
1. Press
on the remote controller to display the Home screen, then set
"System Setup" - "Speaker" - "Configuration" - "Zone 2 Preout" ( →p136) to
"Zone B".
Playing Back
1. Press the
button on the remote controller and select "Audio" - "Zone B".
• In the following cases, "Zone B" cannot be selected.
– When ZONE 2 is On
– When "System Setup" - "Speaker" - "Configuration" - "Zone 2 Preout"
on the Home screen is set to "Zone 2" ( →p136)
2. Select an audio output destination.
Off: Outputs audio only to ZONE A. "A" on the display of the main unit lights
up.
On (A+B): Outputs audio to both ZONE A and ZONE B. "A" and "B" on the
display of the main unit light up.
On (B): Outputs audio only to ZONE B. "B" on the display of the main unit
lights up.
3. Start play on the AV component.
4. Adjust the volume on the transmitter, etc., in ZONE B.
Playback
123
Advertisement
