Advertisement
Remote Controller
Remote Controller
A
STANDBY/ON button
B Input selector buttons: Switches the input to be
played.
C PERSONAL PRESET 1/2/3 buttons: Registers
the current setting conditions such as input
selector, listening mode, etc. or call the
registered settings. ( →p113)
D DIMMER button: You can switch the display off or
adjust the brightness of the display in three steps.
E
(AV ADJUST) button: Settings such as
"HDMI" and "Audio" can be made quickly during
play on the TV screen. ( →p91)
F Cursor buttons and ENTER button: Select
L
the item with the cursors, and press ENTER to
confirm your selection. When the folder or file
M
lists are not shown on one screen on the TV,
press
/
to change the screen.
G
button: Displays the Home.
→p126, p157,
(
H SLEEP button: You can allow the unit to enter
standby automatically when the specified time
has elapsed. Select the time from "30 min", "60
min", "90 min" and "Off". When you do not want
to turn the unit to standby automatically, select
"Off". You can also set this by pressing the
button on the remote controller to display the
Home screen and selecting "System Setup" -
"Hardware" - "Power Management" - "Sleep
Timer" ( →p148).
I HDMI MAIN/SUB button: Select the HDMI OUT
jack to output video signals from "MAIN", "SUB",
and "MAIN+SUB".
J MODE button: Switches between automatic
tuning and manual tuning for AM/FM stations
( →p88) (North American and Taiwanese
models). Also, when an HDMI CEC function-
p167)
enabled AV component is connected to this unit,
you can switch Q. Play buttons between "CEC
MODE" and "RCV MODE" (normal mode).
K +Fav button: Used to register AM/FM radio
stations. ( →p90) (North American and
Taiwanese models)
L
(STATUS) button: Switches the information on
the display.
M
button: Returns the display to the previous
state.
18
Advertisement
