Advertisement
AV Adjust
You can quickly set convenient features such as adjusting sound quality.
AV Adjust
HDMI
Audio Exclusive Mode
Audio
HDMI Out
Room EQ
Sound Delay
Level
Audio Return Channel
You can make the settings on the TV screen while playing something. Press
on the remote controller to display the "AV Adjust" menu.
Select the item with the cursor
/
ENTER to confirm your selection.
Use the cursors to change the settings.
• To return to the previous screen, press
• To exit the settings, press
.
Note
• When the input signals are ones that need a high bandwidth, such as 8K
signals, the "AV Adjust" may not be displayed.
BD/DVD
buttons of the remote controller and press
.
„ HDMI
Audio Exclusive
Mode: You can make the HDMI IN 1 jack exclusively for audio
to improve sound quality. Not that when this is set to on, the output of video
signals will stop and there will be no display on the TV screen.
• The display will appear on the TV screen when you press
signal out is stopped again when you press
HDMI Out:
Select the HDMI OUT jack to output video signals from "MAIN",
"SUB", and "MAIN+SUB".
If the video is behind the audio, you can delay the audio to offset
Sound Delay:
the gap. Different settings can be set for each input selector.
• It cannot be set if the listening mode is Pure Direct and the input signal is
either analog or DSD.
Audio Return Channel:
You can enjoy the sound of the HDMI-connected ARC-
compatible TV through the speakers connected to the unit. Select "On" when
listening to the audio of TV using the speakers of this unit. Select "Off" when the
ARC function is not used.
Playback
, but the video
again.
91
Advertisement
