Advertisement
Inputting Characters
You can input characters or symbols on the keyboard displayed on the TV
screen such as when inputting a password for Wi-Fi Setup ( →p168) or naming
a preset radio station ( →p144).
1. Select a character or symbol with the cursors
controller and press the ENTER button.
2. When saving characters after input, select "OK" and press the ENTER button.
,
,
.
.
/
/
/
/
ENTER
/
/
/
on the remote
;
;
:
:
]
MODE
CLEAR
ZONE 2
HOLD
• Select "A/a" to switch between upper and lower cases. (Can also be switched
with the MODE button on the remote controller.)
• To enter a space, select " ".
• To delete a character on the left of the cursor, select " ".
• To delete all the input characters, press the CLEAR button on the remote
control.
• On the ZONE 2 playback screen, operate the remote controller while pressing
and holding the ZONE 2 HOLD button. To delete all the input characters, only
press the CLEAR button without pressing the ZONE 2 HOLD button.
20
Advertisement
