Advertisement
Selecting a source to play in ZONE 3
1. While pressing the ZONE 3 HOLD button on the remote controller, press the
input selector of the input you want to play in the separate room.
On the main unit, repeatedly press the ZONE CONTROL button to display
"Z3" on the display, then within 8 seconds use the input selector dial to select
the input you want to play in the separate room.
1
2
Adjusting the volume in ZONE 3
When ZONE 3 speakers are used
1. While pressing the ZONE 3 HOLD button on the remote controller, adjust with
the volume buttons. To control on the main unit, press the ZONE CONTROL
button on the main unit and then within 8 seconds adjust with the MASTER
VOLUME dial.
1
1
When using an Integrated amplifier in the separate room
1. Use the volume dial on the integrated amplifier to adjust the volume.
When using an integrated amplifier that does not have a volume control,
adjust using the same procedure described in "When ZONE 3 speakers are
used".
• When connecting an integrated amplifier that does not have a volume
control, in the System Setup menu, set "Multi Zone" - "Zone 3" - "Output
Level" ( →p153) to "Variable". If you do not set this, the volume output will
be very loud and there is a danger of damage to the integrated amplifier,
speakers, etc.
Playback
2
112
Advertisement
