Advertisement
Switching the display
Repeatedly pressing the
button on the remote controller switches the display
of the main unit in the following order.
• The content displayed depends on the source, BLUETOOTH, etc., being
played.
• Depending on the audio signal, "B(Back)" or "W (Wide)" is displayed next to
the number of channels of the input format.
• Not all the information is necessarily displayed.
Listening mode
DTS Neural : X
Input format
DTS-HDMSTR 5 . 1
The display is switched in
a few seconds.
Sampling frequency
1 7 6 . 4 k H z
Input signal resolution
1 0 8 0 p / 5 9 1 6 : 9
Input source and volume
BD/DVD
IP Address
1 9 2 1 6 8 X X X X
4 0 . 0
Playback
82
Advertisement
