Advertisement
Speaker
‰ Zone Speaker (Default Value: No)
Set whether ZONE 2 speakers and ZONE 3 speakers are being used.
• This setting cannot be selected when "Zone 2 Preout" is set to "Zone B".
No
When neither ZONE 2 speakers nor ZONE 3 speakers are
used
Zone 2
When ZONE 2 speakers are used
Zone 2/Zone 3 When both ZONE 2 speakers and ZONE 3 speakers are used
‰ Zone 2 Preout (Default Value: Zone 2)
Set an output destination of the audio output from ZONE 2 PRE/LINE OUT /
ZONE B LINE OUT jack.
• This setting is fixed to "Zone 2" when "Zone Speaker" is set to "Zone 2" or
"Zone 2/Zone 3".
When connecting an integrated amplifier in a separate room
Zone 2
(ZONE 2)
When connecting an integrated amplifier, transmitter of
Zone B
wireless headphones, etc. to ZONE B
‰ Bi-Amp (Default Value: No)
Set whether the speakers are bi-amp connected.
• You cannot select a setting other than "No" or "Front" when using ZONE
speakers.
No
When no speakers are bi-amp connected
Front
When only front speakers are bi-amp connected
• This setting cannot be selected under the following
conditions.
– "Speaker Channels" is set to "6.1.4 ch" or "7.1.4 ch"
– "Speaker Channels" is set to "6.1.2 ch", "7.1.2 ch", "4.1.4
ch", or "5.1.4 ch" and "Zone Speaker" is set to "Zone 2" or
"Zone 2/Zone 3"
– "Speaker Channels" is set to "6.1 ch", "7.1 ch", or "2.1.2 ch"
to "5.1.2 ch" and "Zone Speaker" is set to "Zone 2/Zone 3"
Front/Center
When front speakers and the center speaker are bi-amp
connected
This can only be selected when you have set "Speaker
Channels" to "3.1 ch", "5.1 ch", or "7.1 ch".
‰ Speaker Impedance (Default Value: 6 ohms or above)
Set the impedance (Ω) of the connected speakers.
• For impedance, check the indications on the back of the speakers or their
instruction manual.
When any of the connected speakers have 4 Ω or more to less
4ohms
than 6 Ω impedance
6 ohms or above When the connected speakers all have 6 Ω or more
impedance
Setup
136
Advertisement
