Advertisement
Selecting a source to play in ZONE 2
1. While pressing the ZONE 2 HOLD button on the remote controller, press the
input selector of the input you want to play in the separate room.
On the main unit, repeatedly press the ZONE CONTROL button to display
"Z2" on the display, then within 8 seconds use the input selector dial to select
the input you want to play in the separate room.
1
• Information of a connected device can be displayed on the TV screen in the
separate room. While pressing and holding the ZONE 2 HOLD button on the
remote controller, press the " " button.
2
Adjusting the volume in ZONE 2
When ZONE 2 speakers are used
1. While pressing the ZONE 2 HOLD button on the remote controller, adjust with
the volume buttons. To control on the main unit, press the ZONE CONTROL
button on the main unit and then within 8 seconds adjust with the MASTER
VOLUME dial.
1
1
When using an Integrated amplifier in the separate room
1. Use the volume dial on the integrated amplifier to adjust the volume.
• When connecting an integrated amplifier that does not have a volume
control, in the System Setup menu, set "Multi Zone" - "Zone 2" - "Output
Level" ( →p152) to "Variable" (Default Value : Fixed). If you do not set
this, the volume output will be very loud and there is a danger of damage
to the integrated amplifier, speakers, etc. When connecting an integrated
amplifier that has a volume control, leave this as "Fixed".
‰ Playing Back (ZONE 3) ( →p111)
Playback
2
110
Advertisement
