Advertisement
Remote Controller
N LISTENING MODE buttons: Selects a listening
mode ( →p83).
O DIRAC button: Selects slots where the
measurement results of Dirac Live are saved.
( →p93)
P TONE/DIALOG/SW buttons: Adjusts the sound
quality of the speakers and volume level of the
subwoofer.
TONE button: You can adjust the sound quality
of the speakers.
1. Press TONE repeatedly to select Treble or
Bass and adjust the content.
Treble: Enhances or moderates the high-tone
range of the speakers.
Bass: Enhances or moderates the low-tone
range of the speakers.
2. Press + or - for adjustment.
DIALOG button: Emphasizes movie dialogues
and music vocals to listen to them more easily.
S
It is effective to movie lines in particular. Also, it
exerts the effect even if the center speaker is not
T
used. Select a desired level from "1" (low) to "5"
U
(high).
1. Press DIALOG.
2. Press + or - for adjustment.
V
• Depending on the input source or listening
mode setting, selection is not possible, or the
W
desired effect may not be achieved.
X
SW button: Adjust the speaker level of the
subwoofer while listening to the sound.
1. Press SW.
2. Press + or - to adjust the level between
"-15.0 dB" and "+12.0 dB".
• If you set the unit to the standby mode, the
adjustments you made will be restored to
the previous statuses.
Q Play buttons: Used for playback operations
for the Music Server ( →p118) or USB device
( →p116). Also, switching to "CEC MODE" with
J MODE button allows you to operate an HDMI
CEC function-enabled AV component. (Some
devices may not be operated.)
R ZONE 2/ZONE 3 HOLD button: Used to control
the multi-zone function ( →p108).
S CH SEL button: You can check the volume level
settings ( →p140) for each of the speakers. You
can also change the settings with the number 6
cursor buttons
/ .
T S.RETRIEVER button: Enable Sound Retriever
( →p92) and improve the quality of
compressed audio.
U
MUTE button: Temporarily mutes audio.
Press the button again to cancel muting.
V Volume buttons
W
button: You can start repeat or random
play of the Music Server or USB.
CLEAR button: Deletes all characters you have
entered when entering text on the TV screen.
X
(LIGHT button): Turn the backlight of the
remote controller On/Off. If 10 seconds elapse
with no operations performed after turning it on,
it will automatically turn off.
19
Advertisement
