Advertisement
7. The guidance about outputting the test tone is displayed. Refer to the
illustration to set up the speaker setup microphone in the listening position.
Follow the on-screen instructions to measure.
• Measurement may not be possible if the test tone is too loud or too soft.
Tap "Level Adjust" to adjust the volume of the test tone.
8. When measurement is complete, "Calculating results" is displayed on the
screen. Tap "Transfer to your product" to transfer the measurement data to
the unit.
Disconnect the speaker setup microphone.
The speaker adjustments based on the measurement results are saved in
the unit. You can modify 3 patterns of the filter curves from the measurement
results and register them in 3 slots ( →p184). The filter curves that you
register can be selected with "Room EQ" - "Dirac Live" ( →p93) in "AV
Adjust".
• When measurement is performed with Dirac Live, selection in "Advanced
MCACC" - "Manual MCACC" ( →p160) and "MCACC Data Check"
( →p165) of the Home screen is no longer available. Furthermore, the
measurement results are also reflected in "System Setup" - "Speaker" -
"Distance" ( →p139) of the Home screen, and you will no longer be able to
change the values. (The setting units are displayed as "msec".)
Setup
179
Advertisement
