Advertisement
Manual MCACC
Manual MCACC
„ Fine Channel Level
Adjust the volume level of the speakers while listening to the test tone. After
firstly adjusting the Front Left speaker to the desired volume, adjust the volume
level so that each channel is the same level, starting from the Front Right
speaker. Test tone output alternates between the selected speaker and the
benchmark speaker, so adjust the volume so it becomes the same.
‰ Front Left
(Default Value: 0.0 dB)
Center
(Default Value: 0.0 dB)
Front Right
(Default Value: 0.0 dB)
Height 1 Left
(Default Value: 0.0 dB)
Height 1 Right
(Default Value: 0.0 dB)
Height 2 Left
(Default Value: 0.0 dB)
Height 2 Right
(Default Value: 0.0 dB)
Surround Right
(Default Value: 0.0 dB)
Surr Back Right
(Default Value: 0.0 dB)
Surr Back Left
(Default Value: 0.0 dB)
Surround Left
(Default Value: 0.0 dB)
Subwoofer 1
(Default Value: 0.0 dB)
Subwoofer 2
(Default Value: 0.0 dB)
Select a value between "–12.0 dB" and "+12.0 dB" ("–15.0 dB" and "+12.0 dB"
for subwoofer) (in 0.5 dB increments). A test tone will be output each time you
change the value. Select the desired level.
(Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right,
Surr Back Left) :
• Depending on the use of the ZONE speakers, it may not be possible to select
this setting.
„ Fine Speaker Distance
Make fine adjustments to the distance of the speakers from the listening position
while listening to the test pulse. After firstly setting the measured distance of the
Front Left speaker from the listening position, adjust the distance of the other
speakers, starting with the Front Right speaker. The test pulse is output from
the selected speaker and the benchmark speaker, so adjust the distance so the
point where the test pulse is heard is in the middle of the two speakers.
‰ Front Left
(Default Value: 10.0 ft/3.00 m)
Center
(Default Value: 10.0 ft/3.00 m)
Front Right
(Default Value: 10.0 ft/3.00 m)
Height 1 Left
(Default Value: 10.0 ft/3.00 m)
Height 1 Right
(Default Value: 10.0 ft/3.00 m)
Height 2 Left
(Default Value: 10.0 ft/3.00 m)
Height 2 Right
(Default Value: 10.0 ft/3.00 m)
Surround Right
(Default Value: 10.0 ft/3.00 m)
Surr Back Right
(Default Value: 10.0 ft/3.00 m)
Surr Back Left
(Default Value: 10.0 ft/3.00 m)
Surround Left
(Default Value: 10.0 ft/3.00 m)
Subwoofer 1
(Default Value: 10.0 ft/3.00 m)
Subwoofer 2
(Default Value: 10.0 ft/3.00 m)
• Default values vary depending on the regions.
• Distance units can be switched by pressing MODE on the remote controller.
When the unit is set as feet, you can set between 0.1' and 30' in increments of
0.1'. When the unit is set as meters, you can set between 0.03 m and 9.00 m in
increments of 0.03 m.
(Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right,
Surr Back Left) :
• Depending on the use of the ZONE speakers, it may not be possible to select
this setting.
Setup
160
Advertisement
