Advertisement
Manual MCACC
‰ Advanced EQ Setup
Reverberation characteristics are automatically calibrated according to the
settings made. After making the following settings, place the speaker setup
microphone in the listening position, and connect to the SETUP MIC jack on the
main unit. Press ENTER and follow the on screen instructions.
Time Position (Default Value: 30 - 50 msec)
Specify the calibrated time position in the range between "0 - 20 msec" and "60
- 80 msec" (10 msec intervals).
If the reverberation characteristics differ for each frequency or each channel in
the Reverb View graph, we recommend selecting "30 - 50 msec". If the overall
reverberation characteristics are similar, we recommend selecting "60 - 80
msec".
EQ Type (Default Value: Symmetry)
Select the calibration type.
Symmetry
Speakers that make one set as a left and right pair have their
frequency characteristics calibrated flatly. Speakers not in
pairs, such as the center speaker, are adjusted individually.
Select when you want to give weight to phase characteristics
for calibration.
All Channel Adjust Flatly calibrates individually the frequency characteristics of all
speakers. Select when you want to give weight to frequency
characteristics for calibration.
Front Align
Calibrates speakers other than the front speakers so their
characteristics match those of the front speakers (front
speakers are not calibrated). Select when you want to give
weight to characteristics of the front speakers for calibration.
Standing Wave Multi Position (Default Value: No)
When you select "2" to "9", standing wave calibration can be performed at
multiple listening positions along with the main listening position. If there is only
one listening position, select "No".
• If you select "2" to "9", calibration is first performed for the locations other than the
main position, then the main position is calibrated last.
Setup
164
Advertisement
