Advertisement
„
DD (Dolby Audio - DD)
This mode faithfully reproduces the sound design recorded in the Dolby Digital
audio format.
Dolby Digital is a multi-channel digital format developed by Dolby Laboratories,
Inc. and is widely adopted for use in movie production. It is also a standard audio
format for DVD-Video and Blu-ray Discs. It is possible to record a maximum of
5.1 channels on a DVD-Video or Blu-ray Disc; two front channels, one center
channel, two surround channels, and the LFE channel dedicated to the bass
region (sound elements for the subwoofer).
• To enable transfer of this audio format, connect via a digital cable and set the
audio output on the player to Bitstream output.
„
DD+ (Dolby Audio - DD+)
This mode faithfully reproduces the sound design recorded in the Dolby Digital
Plus audio format.
The Dolby Digital Plus format has been improved based on Dolby Digital,
increasing the number of channels and endeavoring to improve sound quality
by giving more flexibility in data bit rates. Dolby Digital Plus is an optional audio
format based on 5.1 ch for Blu-ray Discs. It is possible to record a maximum of
7.1 channels with additional channels such as the surround back channel.
• To enable transfer of this audio format, connect via an HDMI cable and set
the audio output on the player to Bitstream output.
„
DSur (Dolby Audio - Surr)
This listening mode expands 2 ch or 5.1 ch input signals to 5.1 ch, 7.1 ch or
5.1.2 ch. This mode expands actual channels to more channels for playback
according to the configuration of the connected speakers. Also, even if there is
no speaker for expansion, for example when only front speakers are connected,
audio of surround channel or height channel is virtually created for expansion
playback.
According to the speaker layout, the following listening modes are displayed.
–
DSur
2.0/2.1: When only front speakers are installed
–
DSur
3.0/3.1: When front speakers and center speaker are installed
–
DSur
4.0/4.1: When front speakers and surround speakers are installed
–
DSur
5.0/5.1: When front speakers, center speaker and surround
speakers are installed
–
DSur
6.0/6.1: When front speakers, surround speakers and surround
back speakers are installed
–
DSur
7.0/7.1: When front speakers, center speaker, surround speakers
and surround back speakers are installed
–
DSur
2.0.2/2.1.2: When front speakers and height speakers are
installed
–
DSur
3.0.2/3.1.2: When front speakers, center speaker and height
speakers are installed
–
DSur: Selectable in the "4.1.2 ch", "5.1.2 ch", "6.1.2 ch", "7.1.2 ch",
"4.1.4 ch", "5.1.4 ch", "6.1.4 ch" or "7.1.4 ch" setting with surround speakers
and height speakers installed.
• When "Speaker Virtualizer" ( →p140) is set to "Off" (Default: On), modes
other than
DSur cannot be selected.
Appendix
208
Advertisement
