Advertisement
Input/Output Assign
Input/Output Assign
„ TV Out / OSD
Make settings for TV output and On-Screen Displays (OSD) that appear on the
TV.
‰ HDMI Out (Default Value: MAIN)
Select the HDMI jack to be connected with the TV.
• If devices with different resolutions are connected to HDMI OUT MAIN jack
and SUB jack, images are output with the lower resolution.
MAIN
When connecting the TV to the HDMI OUT MAIN jack
SUB
When connecting the TV to the HDMI OUT SUB jack
MAIN+SUB
When connecting to both the MAIN and SUB jacks
‰ Dolby Vision (Default Value: MAIN)
This setting is only necessary if you have set "HDMI Out" to "MAIN+SUB",
"Zone 2 HDMI" ( →p129) to "Use", and the same video is simultaneously
output from multiple HDMI OUT jacks, such as when the same video from ZONE
2 is output from the MAIN or SUB HDMI OUT jacks.
MAIN
To output Dolby Vision video to a Dolby Vision-supported TV
connected to the HDMI OUT MAIN jack
SUB
To output Dolby Vision video to a Dolby Vision-supported TV
connected to the HDMI OUT SUB jack
ZONE 2
To output Dolby Vision video to a Dolby Vision-supported TV
connected to the HDMI OUT ZONE 2 jack
Off
After selecting "MAIN" or "SUB", if the video on the TV does
not appear correctly
‰ Upscaling (Default Value: Off)
When using a TV that supports 4K/8K, video signals input at 1080p can be
automatically upscaled to 4K/8K for output. Video signals that are input at 4K
can also automatically be output as 8K. Note that to output as 8K, set "HDMI
4K/8K Signal Format" ( →p129) to "8K Standard" or "8K Enhanced", and you
need to connect to a TV that is compatible with the 8K signal format with an
HDMI cable.
• If the TV does not support the 4K/8K resolution with the same frequency
as the frequency of HDMI input video signals, upscaling to 4K or 8K is not
correctly performed. Check the frequency of 4K/8K resolution supported
by the TV, and change the resolution of the video signals input from the AV
component.
Off
When this function is not used
• Select "Off" if your TV does not support 4K/8K.
Auto
When this function is used
‰ Super Resolution (Default Value: 2)
When you have set "Upscaling" to "Auto", you can select the degree of video
signal correction from "Off" and between "1" (weak) and "3" (strong).
Setup
128
Advertisement
