Advertisement
Manual Adjust
You can modify the filter curve to one you like based on the volume level of the
speakers automatically measured with Dirac Live. Edit the filter curve in Pioneer
Remote App.
• To adjust the sound quality with "Manual Adjust", it is first necessary to
measure the speakers of this unit with Dirac Live (
• This function cannot be used when speaker measurement is done with Full
→p158,
Auto MCACC (
p180).
Modifying the filter curve
1. Start the Pioneer Remote App and tap the unit when displayed.
2. Tap "
" in the top left of the Pioneer Remote App screen to display a list of
menus, then tap "Manual Adjust".
3. Select the slot to modify from "Slot1" to "Slot3", then tap "Next".
• The measurement results from Dirac Live are registered in all of the slots
as the default values.
4. After selecting the speaker to adjust first, modify the filter curve.
1
2
3
1 The speaker currently being adjusted. To adjust another speaker, tap the "
next to it and select another speaker.
2 Displays the Menu screen. From the menu, you perform actions such as reset
the speaker adjustments and cancel and exit the adjustments. You can also
copy data from other slots.
3 Drag the points on the filter curve side to side to change the frequency and
4 Recalculate the characteristics from the adjusted content.
5 Transfer the adjusted content to the unit.
6 The value of the point being adjusted. Tap the "
→p178,
p182).
5. When adjustment is finished, tap 4 to recalculate, then tap 5 to transfer the
• In the Home screen, when the number of speaker channels, etc., is changed
4
5
Using an filter curve you have registered
6
When you select a saved slot in "Room EQ" - "Dirac Live" ( →p93) in "AV
Adjust", you can use the registered filter curve.
"
up or down to change the boost.
• You can add a point by tapping on the curve where there isn't a point.
it.
• When the Dirac Live Bass Control is enabled, the bar for editing the
crossover frequency is displayed. Adjust the crossover value by moving the
bar side to side.
adjusted data to the unit.
in "System Setup" - "Speaker" - "Configuration", the adjusted content is
deleted.
Setup
" next to the point to delete
184
Advertisement
