Advertisement
Manual MCACC
„ Standing Wave
This controls the affect of the standing waves that occur when sound waves
reverberating off obstacles such as walls interfere with the original sound waves.
‰ Main
(Default Value: 0.0 dB)
Center
(Default Value: 0.0 dB)
Subwoofer (Default Value: 0.0 dB)
Main:
Control the effect of standing waves for speakers other than the center speaker
and the subwoofer.
/ , select the filter to be adjusted from "1" to
1. After selecting "Filter" with
"3" with
/
and press ENTER.
2. After selecting the central frequency with
/
, then adjust the attenuation with
be selected between "63Hz" and "250Hz". The bandwidth can be selected
between "2.0" and "9.8" (0.2 intervals). Attenuation can be selected between
"0.0dB" and "12.0dB" (0.5dB intervals).
Center:
Control the effect of speaker standing waves for the center speaker.
/ , select the filter to be adjusted from "1" to
1. After selecting "Filter" with
"3" with
/
and press ENTER.
2. After selecting the central frequency with
/
, then adjust the attenuation with
be selected between "63Hz" and "250Hz". The bandwidth can be selected
between "2.0" and "9.8" (0.2 intervals). Attenuation can be selected between
"0.0dB" and "12.0dB" (0.5dB intervals).
/ , adjust the bandwidth with
/ . The central frequency can
/ , adjust the bandwidth with
/ . The central frequency can
Subwoofer:
Control the effect of standing waves for the subwoofer.
/ , select the filter to be adjusted from "1" to
1. After selecting "Filter" with
"3" with
/
and press ENTER.
2. After selecting the central frequency with
/
, then adjust the attenuation with
be selected between "63Hz" and "250Hz". The bandwidth can be selected
between "2.0" and "9.8" (0.2 intervals). Attenuation can be selected between
"0.0dB" and "12.0dB" (0.5dB intervals).
Setup
/ , adjust the bandwidth with
/ . The central frequency can
161
Advertisement
