Advertisement
Connecting an Audio Component
OR
CD
a XLR balanced cable, b Digital optical cable, c Analog audio cable
This is a connection example of an audio component. Connect a CD player
using an XLR balanced cable or digital optical cable. You can also connect a
turntable that has an MM-type cartridge to the PHONO jack.
• If the turntable has a built-in phono equalizer, connect it to any of the AUDIO
If the turntable has a ground wire, connect it to the SIGNAL GND terminal of this unit.
Turntable
IN jacks other than the PHONO jack. Further, if the turntable uses an MC type
cartridge, install a phono equalizer compatible with the MC type cartridge
between the unit and the turntable, and then connect it to any of the AUDIO
PRE OUT
IN jacks other than the PHONO jack.
Connections
69
Advertisement
