Advertisement
Speaker
„ Channel Level
Adjust the volume level of each speaker.
‰ Front Left
(Default Value: 0.0 dB)
Center
(Default Value: 0.0 dB)
Front Right
(Default Value: 0.0 dB)
Height 1 Left
(Default Value: 0.0 dB)
Height 1 Right
(Default Value: 0.0 dB)
Height 2 Left
(Default Value: 0.0 dB)
Height 2 Right
(Default Value: 0.0 dB)
Surround Right (Default Value: 0.0 dB)
Surr Back Right (Default Value: 0.0 dB)
Surr Back Left
(Default Value: 0.0 dB)
Surround Left
(Default Value: 0.0 dB)
Subwoofer 1
(Default Value: 0.0 dB)
Subwoofer 2
(Default Value: 0.0 dB)
Select a value between "-12.0 dB" and "+12.0 dB" ("-15.0 dB" and "+12.0 dB" for
Subwoofer) (in 0.5 dB increments). A test tone will be output each time you change
the value. Select the desired level.
(Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right,
Surr Back Left):
• Depending on the use of the ZONE speakers, it may not be possible to select
this setting.
„ Dolby Enabled Speaker
Change the settings of Dolby Enabled Speakers.
• This setting can be selected when "Configuration" - "Height 1 Speaker" /
"Height 2 Speaker" is set to "Dolby Speaker".
‰ Distance from the ceiling (Default Value: 6.0 ft/1.80 m)
Set the distance between the Dolby Enabled Speaker and the ceiling. Select
between "0.1 ft"/"0.03 m" and "15.0 ft"/"4.50 m" ("0.1 ft"/"0.03 m" units).
• The unit of distance (ft/m) is displayed using the unit selected for the
"Distance" setting.
‰ Reflex Optimizer (Default Value: Off)
You can enhance the reflection effect of Dolby Enabled Speakers from the
ceiling.
• The function is not effective if the listening mode is Pure Direct.
• The function is not effective if "Dirac Live" ( →p93) has been enabled.
Off
When this function is not used
On
When this function is used
„ Speaker Virtualizer
The Speaker Virtualizer function can be switched between On and Off.
‰ Speaker Virtualizer (Default Value: On)
The listening mode with virtual speaker effect such as
On
F.S.Surround can be selected.
Off
The listening mode with virtual speaker effect such as
F.S.Surround cannot be selected.
Setup
140
Advertisement
