Advertisement
Speaker
Double Bass:
This can only be selected when the setting for "Configuration" - "Subwoofer
Preout" is "SW 1" or "SW 1 & SW 2", or the setting for "Passive Subwoofer" is
"1ch" or "2ch", and the "Front" setting is "Full Band".
Boost bass output by feeding bass sounds from the front left and right
speakers and the center speaker to the subwoofer.
"On": Bass output will be boosted
"Off": Bass output will not be boosted
• The setting will not automatically be configured even if you performed
Full Auto MCACC or Dirac Live.
„ Distance
Set the distance from each speaker to the listening position.
‰ Front Left
(Default Value: 10.0 ft/3.00 m)
Center
(Default Value: 10.0 ft/3.00 m)
Front Right
(Default Value: 10.0 ft/3.00 m)
Height 1 Left
(Default Value: 10.0 ft/3.00 m)
Height 1 Right
(Default Value: 10.0 ft/3.00 m)
Height 2 Left
(Default Value: 10.0 ft/3.00 m)
Height 2 Right
(Default Value: 10.0 ft/3.00 m)
Surround Right (Default Value: 10.0 ft/3.00 m)
Surr Back Right (Default Value: 10.0 ft/3.00 m)
Surr Back Left
(Default Value: 10.0 ft/3.00 m)
Surround Left
(Default Value: 10.0 ft/3.00 m)
Subwoofer 1
(Default Value: 10.0 ft/3.00 m)
Subwoofer 2
(Default Value: 10.0 ft/3.00 m)
• Default values vary depending on the regions.
• The unit of distance can be changed by pressing the MODE button on the
remote controller. When the unit is set as "feet", you can set between 0' 0"
1/2 and 30' 0" in increments of 1/2. When using the unit "meter", the setting is
available in increments of 0.01 m from 0.01 m to 9.00 m.
• When measurements are made using Dirac Live (
displayed as "msec" and the value cannot be changed.
(Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right,
Surr Back Left):
• Depending on the use of the ZONE speakers, it may not be possible to select
this setting.
Setup
→p178,
p182), units are
139
Advertisement
