(*3) If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected.

(*4) If the input format is any of the following and the number of channels is monaural, this listening mode becomes unavailable.

– DTS, DTS 96/24, DTS Express, DTS-HD HR, DTS-HD MSTR, PCM, music file

(*5) Surround speakers or height speakers need to be installed.

(*6) A center speaker, surround speakers, or height speakers need to be installed.

(*7) Cannot be selected if "Speaker Virtualizer" ( →p140) is set to "Off".

(*8) Cannot be selected when the "IMAX Mode" ( →p142) is set to "Off" (the default value is Auto).

(*9) This cannot be selected when the input format is DTS Express.

(*10) Cannot be selected when the input format is monaural.

(*11) The listening mode displayed depends on the speaker layout ( →p200). Furthermore, when the setting for "Speaker Virtualizer" ( →p140) is "Off" (the default

value is On), then modes other than

(*12) Can only be selected when the "IMAX Mode" ( →p142) is set to "Off" (the default value is Auto).

(*13) Displayed as "DTS" on this unit.

(*14) Displayed as "DTS-HD" on this unit.

Atmos and

DSur cannot be selected.

‰ Speaker Layouts and Selectable Listening

Modes ( →p200)

Appendix

206