Add/Edit Static Mac Forwarding Rules - ZyXEL Communications XMG1930-30 User Manual

The following table describes the labels in this screen.
Table 196 SWITCHING > Static MAC Forwarding
LABEL
Index
Active
Name
MAC Address
VID
Port
Add/Edit
Delete

55.2.1 Add/Edit Static MAC Forwarding Rules

Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > Static MAC Forwarding screen
to display this screen.
Figure 264 SWITCHING > Static MAC Forwarding > Add/Edit
The following table describes the labels in this screen.
Table 197 SWITCHING > Static MAC Forwarding > Add/Edit
LABEL
Active
Name
MAC Address
VID
Chapter 55 Static MAC Forwarding
DESCRIPTION
This is the index number of a static MAC address rule.
This field displays whether this static MAC address forwarding rule is active. You may temporarily
deactivate a rule without deleting it.
This field displays the descriptive name for identification purposes for this static MAC address-
forwarding rule.
This field displays the MAC address that will be forwarded and the VLAN identification number to
which the MAC address belongs.
This field displays the ID number of the VLAN group.
This field displays the port where the MAC address shown in the next field will be forwarded.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the table
heading row to select all entries.
Click Add/Edit to add a new rule or edit a selected one.
Click Delete to remove the selected rules.
DESCRIPTION
Enable the switch button to activate your rule. You may temporarily deactivate a rule without
deleting it by disabling the switch.
Enter a descriptive name for identification purposes for this static MAC address forwarding rule.
You can enter up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ].
Enter the MAC address in valid MAC address format, that is, six hexadecimal character pairs.
Note: Static MAC addresses do NOT age out.
Enter the VLAN identification number.
XMG1930 Series User's Guide
378