ZyXEL Communications XMG1930-30 User Manual page 115

Setting Up the Switch
Open the Web Configurator. Go to the MAINTENANCE > Configuration > Auto Configuration screen.
1
Enable the switch button in the Active field to enable auto configuration. Select DHCP in the Mode field
2
and click Apply to save your changes.
Enable the switch button in the Active field to enable auto configuration. Select DHCP in the Mode field,
3
and enter the VLAN ID where the DHCP server belongs to in the DHCP VLAN ID field. Click Apply to save
your changes.
Go to the SYSTEM > IP Setup > IP Setup screen. Click the Add/Edit button in the IP Interface table to open
4
the configuration screen.
Select DHCP Client.
5
If you want to load the auto configuration file with DHCP option 60 enabled and a Vendor Class
6
Identifier assigned when you reboot the Switch, follow the instruction below. Otherwise, skip this step. In
the SYSTEM > IP Setup > IP Setup > Add/Edit screen, select the check box in the Option-60 field. Enter a
Vendor Class Identifier in the Class-ID field, and specify the VLAN interface in the VID field. In this
example, we use "Zyxel Corp" and VID 1. Click Apply.
Chapter 6 Tutorials
XMG1930 Series User's Guide
115