ZyXEL Communications XMG1930-30 User Manual page 144

Click an index in the Port column in the DDMI screen to view current transceivers' status.
Figure 86 MONITOR > Port Status > DDMI > DDMI Details
The following table describes the labels in this screen.
Table 45 MONITOR > Port Status > DDMI > DDMI Details
LABEL DESCRIPTION
Transceiver Information
Port No This identifies the SFP port.
Connector Type This displays the connector type of the optical transceiver.
Vendor This displays the vendor name of the optical transceiver.
Part Number This displays the part number of the optical transceiver.
Serial Number This displays the serial number of the optical transceiver.
Revision This displays the revision number of the optical transceiver.
Date Code This displays the date when the optical transceiver was manufactured.
Transceiver This displays details about the type of transceiver installed in the SFP slot.
Calibration This field is available only when an SFP transceiver is inserted into the SFP slot.
Internal displays if the measurement values are calibrated by the transceiver. External displays
if the measurement values are raw data which the Switch calibrates.
DDMI Information
Type This displays the DDMI parameter.
Temperature This displays the temperature inside the SFP transceiver in degrees Celsius or Fahrenheit.
(C/F)
Voltage (V) This displays the level of voltage being supplied to the SFP transceiver.
Chapter 15 Port Status
XMG1930 Series User's Guide
144