Table of Contents
Advertisement
29.1 Time Range Overview
You can set up one-time and recurring schedules for time-oriented features, such as PoE and classifier.
The UAG supports one-time and recurring schedules. One-time schedules are effective only once, while
recurring schedules usually repeat. Both types of schedules are based on the current date and time in
the Switch.
You can set a time range for time-oriented features such as Classifier ACL (Access Control List) rule
which categorizes data packets into different network traffic flow. The advantage of the time range
feature is that it allows you to schedule the active time of configurations.
The time range can be configured in two ways – Absolute and Periodic. Absolute is a fixed time range
with a start and end time. Periodic is recurrence of a time range and does not have an end time.
29.1.1 What You Can Do
Use the Time Range screen
29.2 Configuring Time Range
Click SYSTEM > Time Range in the navigation panel to display the screen as shown.
Figure 137 SYSTEM > Time Range
Chapter 29 Time Range
(Section 29.2 on page
210) to view or define a schedule on the Switch.
XMG1930 Series User's Guide
210
C
H A P T E R
Time Range
29
Advertisement
Table of Contents
Troubleshooting
