Viewing And Editing Static Mac Forwarding Rules; Figure 8-2 Static Mac Forwarding: Summary Table; Table 8-2 Static Mac Forwarding: Summary Table - ZyXEL Communications Dimension GS-3012 User Manual

Dimension GS-3012 Gigabit Ethernet Switch
LABEL
Port Select a port where the MAC address entered in the previous field will be automatically forwarded.
Add Click Add to save the new rule to the switch. It then displays in the summary table at the bottom of
the screen.
Cancel Click Cancel to reset the fields to your previous configuration.
Clear Click Clear to clear the fields to the factory defaults.

8.3 Viewing and Editing Static MAC Forwarding Rules

To view a summary of the rule configuration, scroll down to the summary table at the bottom of the Static MAC
Forwarding screen.
To change the settings of a rule, click a number in the Index field.
The following table describes the labels in this screen.
LABEL
Index Click an index number to modify a static MAC address rule for a port.
Active This field displays whether this static MAC address forwarding rule is active (Yes) or not (No).
You may temporarily deactivate a rule without deleting it.
Name This field displays the descriptive name for identification purposes for this static MAC address-
forwarding rule.
MAC Address This field displays the MAC address that will be forwarded and the VLAN identification number to
which the MAC address belongs.
Port This field displays the port where the MAC address shown in the next field will be forwarded.
Delete Check the rule(s) that you want to remove in the Delete column, then click the Delete button.
Cancel Click Cancel to clear the selected checkboxes in the Delete column.
8-2
Table 8-1 Static MAC Forwarding

Figure 8-2 Static MAC Forwarding: Summary Table

Table 8-2 Static MAC Forwarding: Summary Table

DESCRIPTION
DESCRIPTION
Static MAC Forward Setup