Table of Contents
Advertisement
B
Click this icon to switch between the Web Configurator's Standard or Networked AV mode (with
–
Access L3 license only).
B/C
Click this icon to go to the NCC (Nebula Control Center) portal website.
–
C/D – Click this icon to search for specific configurations or status you are looking for. Enter the keywords
and click the result link. This will direct you to the specific configuration or status page.
D/E – Click this icon to update the information in the screen you are currently viewing.
E/F
Click this icon to save your configuration into the Switch's non-volatile memory. Non-volatile
–
memory is the configuration of your Switch that stays the same even if the Switch's power is turned off.
F/G
Click this icon to display the Setup Wizard that contains the Basic, Protection, VLAN, and QoS setup
–
screens.
G/H
Click this icon to display web help pages. The help pages provide descriptions for all of the
–
configuration screens.
H/I
Click this icon to go to the Zyxel Community Biz Forum.
–
I/J
Click this icon to log out of the Web Configurator.
–
J/K
This displays the Nebula Cloud Control Status. The ON/OFF switch displays if NCC Discovery is
–
enabled. If a status circle turns Orange, it means the Switch is unable to connect to NCC. Hover the
mouse over the status circle to check the diagnostic message. You can also click the ON/OFF switch to
go to the SYSTEM > Cloud Management screen and check the diagnostic messages. See
34 on page 119
for more information.
In the navigation panel, click a main link to reveal a list of sub-menu links.
The following table describes the links in the navigation panel. The navigation panel varies depending
on the product model you use.
Table 30 Navigation Panel Links (Standard Mode)
LINK
DESCRIPTION
DASHBOARD
This link takes you to the main dashboard screen that displays general system and device infor-
mation.
MONITOR
ARP Table
This link takes you to a screen that displays the current ARP table of the Switch. You can view the
IP and MAC address mapping, VLAN ID, ARP aging time, and ARP entry type of a device
attached to a port.
IP Table
This link takes you to a screen where you can view the IP address and VLAN ID of a device
attached to a port.
IPv6 Neighbor
This link takes you to a screen where you can view the Switch's IPv6 neighbor table.
Table
MAC Table
This link takes you to a screen where you can view the MAC address and VLAN ID of a device
attach to a port. You can also view what kind of MAC address it is.
Neighbor
This link takes you to a screen where you can view neighbor devices (including non-Zyxel
devices) connected to the Switch.
Path MTU Table
This link takes you to a screen where you can view the IPv6 path MTU information on the Switch.
Port Status
This link takes you to a screen where you can view the port statistics.
Routing Table
Click the link to unfold the following sub-link menu.
Chapter 4 Web Configurator
XMG1930 Series User's Guide
89
Section Table
Advertisement
Table of Contents
Troubleshooting
