Viewing And Editing Static Mac Forwarding Rules; Figure 46 Static Mac Forwarding: Summary Table; Table 20 Static Mac Forwarding; Table 21 Static Mac Forwarding: Summary Table - ZyXEL Communications GS-3012 Series User Manual

Chapter 9 Static MAC Forward Setup
The following table describes the labels in this screen.

Table 20 Static MAC Forwarding

LABEL
Active
Name
MAC
Address
VID
Port
Add
Cancel
Clear

9.3 Viewing and Editing Static MAC Forwarding Rules

To view a summary of the rule configuration, scroll down to the summary table at the bottom
of the Static MAC Forwarding screen.
To change the settings of a rule, click a number in the Index field.

Figure 46 Static MAC Forwarding: Summary Table

The following table describes the labels in this screen.

Table 21 Static MAC Forwarding: Summary Table

LABEL
Index
Active
Name
MAC Address This field displays the MAC address that will be forwarded.
VID
Port
98
DESCRIPTION
Select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by clearing this check box.
Enter a descriptive name for identification purposes for this static MAC address
forwarding rule.
Enter the MAC address in valid MAC address format, that is, six hexadecimal character
pairs.
Note: Static MAC addresses do not age out.
Enter the VLAN identification number.
Type the number of a port where the MAC address entered in the previous field will be
automatically forwarded.
Click Add to insert the entry in the summary table below and save your changes to the
switch's run-time memory. The switch loses these changes if it is turned off or loses
power, so use the Save link on the top navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Click Clear to clear the fields to the factory defaults.
DESCRIPTION
Click an index number to modify a static MAC address rule for a port.
This field displays whether this static MAC address forwarding rule is active (Yes) or
not (No). You may temporarily deactivate a rule without deleting it.
This field displays the descriptive name for identification purposes for this static MAC
address-forwarding rule.
This field displays the VLAN identification number to which the MAC address belongs.
This field displays the port where the MAC address shown in the next field will be
forwarded.
GS-3012/GS-3012F User's Guide