ZyXEL Communications XMG1930-30 User Manual page 512

Figure 367 SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. Status
The following table describes the labels in this screen.
Table 287 SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. Status
LABEL DESCRIPTION
Database Status
This section displays the current settings for the DHCP snooping database. You can configure them in the SECURITY
> IPv4 Source Guard > DHCP Snooping > DHCP Snp. Setup screen.
Agent URL This field displays the location of the DHCP snooping database.
Write Delay This field displays how long (in seconds) the Switch tries to complete a specific update in the
Timer
DHCP snooping database before it gives up.
Abort Timer This field displays how long (in seconds) the Switch waits to update the DHCP snooping
database after the current bindings change.
Agent Running This field displays the status of the current update or access of the DHCP snooping
database.
None: The Switch is not accessing the DHCP snooping database.
Read: The Switch is loading dynamic bindings from the DHCP snooping database.
Write: The Switch is updating the DHCP snooping database.
Delay Timer This field displays how much longer (in seconds) the Switch tries to complete the current
Expiry
update before it gives up. It displays Not Running if the Switch is not updating the DHCP
snooping database right now.
Abort Timer This field displays when (in seconds) the Switch is going to update the DHCP snooping
Expiry
database again. It displays Not Running if the current bindings have not changed since the
last update.
Last Succeeded This field displays the last time the Switch updated the DHCP snooping database
Time
successfully.
Last Failed Time This field displays the last time the Switch updated the DHCP snooping database
unsuccessfully.
Chapter 74 DHCP Snooping
XMG1930 Series User's Guide
512