Table of Contents
Advertisement
Figure 341 SECURITY > ACL > Classifier > Classifier Setup > Add/Edit
The following table describes the labels in this screen.
Table 268 SECURITY > ACL > Classifier > Classifier Setup > Add/Edit
LABEL
DESCRIPTION
Active
Enable the switch button to enable this rule.
Name
Enter a descriptive name for this rule for identifying purposes. You can enter up to 32 printable ASCII
characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ].
Weight
Enter a number between 0 and 65535 to specify the rule's weight. When the match order is in manual
mode in the Classifier Global Setting screen, a higher weight means a higher priority.
Log
Select this option to have the Switch create a log message when the rule is applied and record the
number of matched packets in a particular time interval.
Note: Make sure you also enable logging in the Classifier Global Setting screen.
Count
Select this option to have the Switch count how many times the rule is applied.
Chapter 67 Classifier
XMG1930 Series User's Guide
475
Advertisement
Table of Contents
Troubleshooting
