Hardware Panels; Chapter 3 Hardware Panels; Front Panel Connections - ZyXEL Communications XMG1930-30 User Manual

This chapter describes the front panel and rear panel of the Switch and shows you how to make the
hardware connections.

3.1 Front Panel Connections

The following figures show the front panels of the Switch.
Figure 12 Front Panel: XMG1930-30
Figure 13 Front Panel: XMG1930-30HP
The following table describes the ports.
Table 8 Front Panel Connections
CONNECTOR
100M, 1G, and 2.5G
RJ-45 Ethernet Ports
Port 1 – 24
1G, 2.5G, 5G, and
10G RJ-45 Ethernet
Ports
Port 25 – 28
100M, 1G, and 2.5G
RJ-45 PoE Ports
Port 1 – 20
100M, 1G, and 2.5G
RJ-45 PoE Ports
Port 21 – 24
100M, 1G, 2.5G, 5G,
and 10G RJ-45 PoE
Ports
Port 25 – 28

Chapter 3 Hardware Panels

Hardware Panels

DESCRIPTION
These are 2.5GBase-T auto-negotiating and auto-crossover Ethernet ports.
Connect these ports to a notebook computer, a workstation, a WiFi 6 (802.11ax) router, a
WiFi 6 (802.11ax) AP (Access Point), or an Ethernet switch.
These are 10GBase-T auto-negotiating and auto-crossover Ethernet ports.
Connect these ports to a gaming computer, a NAS (network-attached storage), or a server.
These are 2.5GBase-T auto-negotiating and auto-crossover IEEE802.3at PoE+ 30 W ports.
Connect these ports to a PTZ (pan, tilt and zoom) camera, a WiFi 6 (802.11ax) router, a WiFi 6
(802.11ax) AP, or an Ethernet switch.
These are 2.5GBase-T auto-negotiating and auto-crossover IEEE802.3bt PoE++ 60 W ports.
Connect these ports to a PTZ (pan, tilt and zoom) camera, a WiFi 6 (802.11ax) router, a WiFi 6
(802.11ax) AP, or an Ethernet switch.
These are 10GBase-T auto-negotiating and auto-crossover IEEE802.3bt PoE++ 60 W ports.
Connect these ports to a PTZ (pan, tilt and zoom) camera, a WiFi 6 (802.11ax) router, a WiFi 6
(802.11ax) AP, or an Ethernet switch.
XMG1930 Series User's Guide
45
C
H A P T E R
3