Oam Details - ZyXEL Communications XMG1930-30 User Manual

Figure 168 PORT > OAM > OAM Status
The following table describes the fields in the above screen.
Table 122 PORT > OAM > OAM Status
LABEL
Local
This section displays information about the ports on the Switch.
Port
Mode
Remote
This section displays information about the remote device.
Mac Address
OUI
Mode
Config

36.2.1 OAM Details

Use this screen to view OAM configuration details and operational status of a specific port. Click a
number in the Port column in the PORT > OAM > OAM Status screen to display the screen as shown next.
Chapter 36 OAM
DESCRIPTION
This field displays the port number.
This field displays the operational state of the port when OAM is enabled on the port.
Active – Allows the port to issue and respond to Ethernet OAM commands.
Passive – Allows the port to respond to Ethernet OAM commands.
This field displays the MAC address of the remote device.
This field displays the OUI (first 3 bytes of the MAC address) of the remote device.
This field displays the operational state of the port when OAM is enabled on the port.
Active – Allows the port to issue and respond to Ethernet OAM commands.
Passive – Allows the port to respond to Ethernet OAM commands.
This field displays the capabilities of the Switch and remote device.
XMG1930 Series User's Guide
256