Cf Card Status Led; Management Ethernet Port Leds - H3C CR16000-F Installation Manual

Figure 2 CSR05SRP1P3 MPU LEDs
(1) Management Ethernet port LED
(3) Card status LEDs
(5) Fan tray status LEDs (FAN OK and FAIL)
Figure 3 CSR05SRP1P3-G MPU LEDs
(1) Management Ethernet port LED
(3) Card status LEDs
(5) Fan tray status LED (FAN)
NOTE:
Unless otherwise stated, the flashing frequency of the LEDs is 0.5 Hz.

CF card status LED

Table 1 CF card status LED description
Status
Steady green
Flashing green
Off

Management Ethernet port LEDs

The CSR05SRP1L1 and CSR05SRP1L3 MPUs each provide a pair of LEDs LINK and ACT for the
management Ethernet port to indicate its link and data forwarding status. See
description.
1
6 5 4
1
5
Description
The CF card is present and idle. Do not hot swap it.
The CF card is present and the system is reading/writing the
card. Do not hot swap it.
•
No CF card is present.
•
The CF card is in offline state. Do not hot swap it.
2
3
(2) MPU active/standby status LED (ACTIVE)
(4) Power supply status LEDs (PWR OK and FAIL)
(6) CF card status LED (CFS)
4 3
(2) MPU active/standby status LED (ACTIVE)
(4) Power supply status LED (PWR)
2
2
Table 2 for the LED