H3C CR16000-F Installation Manual page 37

For the CR16010H-F, CR16010H-FA,CR16018-FA, or CR16018-F router, each hook on
the cable management bracket has a cutout. You can also feed the cable tie through the
cutout to secure the power cord.
For the CR16006-F router with horizontal power supply slot, see

power cord.
3. Connect the other end of the power cord to the AC power receptacle of the power source and
switch on the circuit breaker.
4. Verify the power supply input status LED.
If the LED is on, the power cord is correctly connected. For description of power supply status
LEDs, see "Appendix C LEDs."
Figure 7 Securing the power cord (vertical slot)
Figure 8 Securing the power cord (horizontal slot)
7
Figure 8 to secure the