Switching Fabric Modules - H3C CR16000-F Installation Manual

Component
IMPORTANT:
• Do not install the universal open application platform in slot 6 of the CR16010-F router or slot 8 of
the CR16014-F router.
• The shared network interface can operate only at 1000 Mbps and can be connected only with a
GE Ethernet port.
• Do not use USB extension cables to connect the USB ports on the universal open application
platform.
Table 30 Hard disk specifications
Model
UIS-SSD-960GB-SATA-6G-SFF-EV
UN-SSD-960G-SATA-6G-SFF-EV-1
Table 31 Compatibility matrixes between the universal open application platform and routers
Model
IM-OAPX

Switching fabric modules

CAUTION:
The console port on a switching fabric module is provided only for H3C Support to perform
maintenance and updates. Operations without permission are not allowed. H3C will not be liable for
any consequences caused thereby.
CR16006- CR16010-F/
F CR16014-F
Supported Supported
Specification
•
2 × USB connectors (USB 2.0)
Capacity Interface type
960 G SATA
960 G SATA
CR16010H-F
(five
switching
fabric
modules)/CR
16018-F (five
switching
fabric
modules)
Supported
34
Interface rate
6 Gbps
6 Gbps
CR16010H-F
(four switching
fabric
CR16010H-FA/
modules)/CR160
CR16018-FA
18-F (four
switching fabric
modules)
Not supported Not supported