H3C CR16000-F Installation Manual page 125

Table 28 Compatibility matrixes between network data encryption service processing units
and routers
Model
IM-SFMX
NOTE:
• The MIC-SM is not hot swappable.
• The MIC-SM must be installed on an IM-SFMX for use. It occupies one subcard slot.
• The IM-SFMX provides one subcard slot. When used without a subcard, it uses non-SM
algorithms to encrypt and decrypt network data. When used with an MIC-SM, it uses SM
algorithms to encrypt and decrypt network data.
Universal open application platform
CAUTION:
The internal console port is provided only for H3C Support to perform maintenance and updates.
Operations without permission are not allowed. H3C will not be liable for any consequences caused
thereby.
CAUTION:
To avoid data loss on the hard disk, you must shut down the universal open application platform
before performing the following operations:
• Reboot or hot plug the universal open application platform.
• Reboot or shut down the router.
Table 29 Universal open application platform specifications
Component
Processor
Memory
Storage
Chipset
User port
CR16010H-F (five
switching fabric
CR16006-F/C
modules)/CR160
R16010-F/CR
18-F (five
16014-F
switching fabric
modules)
Supported Supported
CR16010H-F (four
switching fabric
modules)/CR16018-
F (four switching
fabric modules)
Not supported
Specification
Intel Skylake Xeon CPU
•
A maximum power consumption of 205 W
•
A maximum of 2.6 GHz CPU clock speed
•
38.5 MB cache
Six DDR4 memory modules
•
Single DIMM capacity: 32 GB
•
Total memory capacity: 192 GB
Maximum storage capacity: 2 × 960 GB
Intel C62x Lewisburg chipset compatible with LBG-T SKU
•
2 × console ports
•
1 × BMC network port
•
1 × shared network port (can be used as an Ethernet
port or a BMC network port)
•
1 × VGA connector
•
1 × USB connector (USB 3.0)
33
CR16010H-FA/CR
16018-FA
Not supported