H3C CR16000-F Installation Manual page 195

Network cable management
Figure 4 Network cable management
Optical fiber management
CAUTION:
The core of optical fibers is thin and fragile. Do not use cable ties to bind the optical fibers. Use soft
binding tapes to carefully bind optical fibers. Avoid excessive force. For more information, see the
binding tape use instructions.
Figure 5 Optical fiber management
Power cord management
Route the power cords according to the actual conditions in the equipment room, such as the
locations of power distribution cabinets, receptacles, and lightning protection boxes. When routing
AC power cords, connect them to a power distribution cabinet in the equipment room through PDUs
on the rack or through a grounding strip. When routing DC power cords, connect them directly to a
power distribution cabinet in the equipment room.
4