Fan Tray Status Leds - H3C CR16000-F Installation Manual

The CSR05SRP1P3A, CSR05SRP1P1, CSR05SRP1P3, CSR05SRP1P3-G, CSR05SRP1R3A,
and CSR05SRP1R3 MPUs each provide a LED for each management Ethernet port to indicate their
link and data forwarding status. See
Table 2 Management Ethernet port LED description (1)
LINK LED status
On
On
Off
Table 3 Management Ethernet port LED description (2)
LED mark
LINK/ACT

Fan tray status LEDs

The CSR05SRP1L1 and CSR05SRP1L3 MPUs each provide fan tray LEDs FAN0 (OK and FAIL)
and FAN1 (OK and FAIL) to indicate the fan tray operating status. The CSR05SRP1P3A,
CSR05SRP1P1, CSR05SRP1P3, CSR05SRP1R3A, and CSR05SRP1R3 MPUs each provide a
pair of LEDs FAN OK and FAIL to indicate the fan tray operating status. See
description for the fan tray status LEDs.
The CSR05SRP1P3-G MPU provides a FAN LED to indicate the fan tray operating status. See
5 for the description for the fan tray status LED.
The CR16014-F and CR16010-F (two fan trays) routers each have two fan trays. FAN0 and FAN1 on
the MPU indicate the operating status of the fan trays respectively.
Table 4 Fan tray LED description (1)
OK LED status
On
Off
Off
Table 5 Fan tray LED description (2)
LED
FAN
Table 3
ACT LED
status
Flashing
Off
Off
Status
Flashing
On
Off
FAIL LED
status
Off
On
Off
Status
Steady green
Steady red
Off
for the LED description.
Description
A link is present, and the management Ethernet port is receiving
or sending data.
A link is present.
No link is present.
Description
A link is present, and the management Ethernet port is
receiving or sending data.
A link is present.
No link is present.
Description
The fan tray is operating correctly.
An issue has occurred on the fan tray or the fan tray is not
present.
The router is not powered on.
Description
The fan tray is operating correctly.
An issue has occurred on the fan tray or the fan tray is not
present.
The router is not powered on.
3
Table 4 for the
Table