Device-Specific Components - Dräger Savina 300 Instructions For Use Manual

Device-specific components

The device-specific components must be removed
from the device and, if necessary, disassembled.
Removing the expiratory valve
1 Turn the locking ring (A) to the left end position.
2 Remove the expiratory valve from the fitting.
Disassembling the expiratory valve
B
1 Remove the flow sensor sleeve (B) from the
expiratory valve.
2 Remove the diaphragm (C) and do not
disassemble further.
3 Remove the water trap container (D).
4 Drain the water trap container.
Instructions for use Savina 300 SW 5.n
A
C
D
Reprocessing
177