Range Of Functions; Therapy Types; Ventilation Functions; Monitoring Functions - Dräger Savina 300 Instructions For Use Manual

Range of functions

The functions described correspond to the overall
functionality of Savina 300. Some functions are
only optional and may not be included in the
individual device configuration. The optional
functions and the part numbers of the accessories
are listed in the separate list of accessories.
Not all options are available for the product variant
Classic.

Therapy types

– Invasive ventilation (Tube)
– Non-invasive ventilation (NIV)
– O therapy
2

Ventilation functions

For a detailed description of the ventilation modes
and the additional settings, see page 223. For
abbreviations, see page 27.
Ventilation modes
Volume-controlled ventilation:
– VC-CMV
– VC-AC
– VC-SIMV
– VC-MMV
Pressure-controlled ventilation:
– PC-AC
– PC-BIPAP
– PC-APRV
Support of spontaneous breathing:
– SPN-CPAP
Instructions for use Savina 300 SW 5.n
Additional settings for ventilation
– Apnea ventilation
– Trigger settings
– Sigh
– AutoFlow
– Tube compensation (ATC)
Special maneuvers
– Suction maneuver with oxygenation
– Medication nebulization
– Manual inspiration – Inspiration hold
– Manual expiration – Expiration hold
– Intrinsic PEEP

Monitoring functions

Setting alarm limits for the following parameters:
– Expiratory minute volume MV
– Maximum airway pressure Paw
– Inspiratory tidal volume VT
– Respiratory rate RR
– Apnea alarm time T
– End-expiratory CO
– Time until disconnection alarm T
(during NIV )
– Inspiratory O concentration FiO
2
mode)
In HPO mode, the alarm limits for the O
concentration FiO are automatically linked to the
2
FiO set value.
2
During non-invasive ventilation and O
certain monitoring functions are switched off or can
be switched off.
Overview
apn
concentration etCO
2 2
disconnect
(in LPO
2
2
therapy,
2
25