Konica Minolta bizhub C658 Service Manual page 1508

bizhub C658/C558/C458/C368/C308/C258
3.23 CC###
3.23.1 CC140 (bizhub C658/C558/C458/C368/C308/C258)
(1) Contents
Trouble type
Rank
Trouble detection condition -
Trouble isolation
Relevant electrical parts
(2) Procedure
NOTE
▪ Contact the responsible people of KM before taking some countermeasures.
3.23.2 CC151, CC152 (bizhub C658/C558/C458/C368/C308/C258)
(1) Contents
Trouble type
Rank
Trouble detection condition A fault is detected in a sequence of ROM contents check of the MFPB during starting.
Trouble isolation
Relevant electrical parts
(2) Procedure
1. Check the ROM version.
2. Rewrite the firmware.
3. Replace MFPB. (bizhub C368/C308/C258
3.23.3 CC155 (bizhub C658/C558/C458/C368/C308/C258)
(1) Contents
Trouble type
Rank
Trouble detection condition Data of flash ROM of the finishing options is determined to be faulty when the main power switch is turned ON.
Trouble isolation
Relevant electrical parts
(2) Procedure
(a) When FS-533, FS-534, FS-534SD, FS-536, FS-536SD, FS-537, or FS-537SD is installed
1. Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord,
and turn ON the main power switch.
2. Rewrite the firmware.
3. Replace FSCB. (FS-533 / FS-534/FS-534SD / FS-536/FS-536SD / FS-537/FS-537SD)
(b) When JS-506 is installed
1. Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord,
and turn ON the main power switch.
2. Rewrite the firmware.
3. Replace JSCB.
3.23.4 CC156 (bizhub C658/C558/C458/C368/C308/C258)
(1) Contents
Trouble type
Rank
Trouble detection condition Upgrade of the firmware has not been successful.
Trouble isolation
Relevant electrical parts
(2) Procedure
1. Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord,
and turn ON the main power switch.
2. Rewrite the firmware.
CC140: Trouble related to security
C
-
-
• CC151: ROM contents error upon startup (MSC)
• CC152: ROM contents error upon startup (IR)
C
-
MFP board (MFPB)
/ bizhub C658/C558/C458)
CC155: Finisher ROM error (When FS-533, FS-534, FS-534SD, FS-536, FS-536SD, FS-537, FS-537SD, or
JS-506 is installed)
C
-
<When FS-533, FS-534, FS-534SD, FS-536, FS-536SD, FS-537, or FS-537SD is installed>
• FS control board (FSCB)
<When JS-506 is installed>
• JS control board (JSCB)
CC156: DF ROM error (bizhub C368/C308/C258 When DF-704 is installed, bizhub C658/C558/C458)
C
-
DF control board (DFCB)
K TROUBLESHOOTING > 3. TROUBLE CODE
K-180