Konica Minolta bizhub C658 Service Manual page 1825

bizhub C658/C558/C458/C368/C308/C258
7. 1ST TRANSFER SECTION
7.1 Configuration
NOTE
▪ bizhub C658/C558/C458 transfer belt units and bizhub C368/C308/C258 transfer belt units have different cleaning blades. Make
sure to use the transfer belt dedicated to your machine.
▪ To replace the transfer belt unit with a new one, confirm the model of machine at first. Then make sure to use the transfer belt
unit dedicated to your machine.
[4]
[3]
[2]
[1]
[1] Cleaning blade
[3] 1st transfer roller pressure mechanism
[5] Separation claw
[7] 1st transfer roller/C
[9] 1st transfer roller/Y
7.2 Drive
The following illustration is for bizhub C368/C308/C258.
[1]
[1] Transfer belt driven roller
[3] Fusing motor (M3)
O THEORY OF OPERATION bizhub C658/C558/C458/C368/C308/C258 > 7. 1ST
[5]
[6]
[7]
[8]
[9]
[3]
[2]
[5]
O-50
[2] Transfer belt
[4] 1st transfer roller pressure cam
[6] 1st transfer roller/K
[8] 1st transfer roller/M
- -
[4]
[2] 1st transfer pressure clutch (CL5)
[4] Transport motor (M1)
TRANSFER SECTION