Konica Minolta bizhub C658 Service Manual page 2003

bizhub C658/C558/C458/C368/C308/C258
[7] Paper length detection plate
4.2.2 Paper feed tray locking mechanism
• The paper feed tray is provided with a locking mechanism.
(1) Unlocking the paper feed tray
• With drawing the lever of the paper feed tray to the front will disengage the tray lock lever equipped on the right side of the paper feed
tray.
• The paper feed tray can be pulled out of the machine by continuing pulling the lever with the tray lock lever disengaged.
• Rollers are provided for the right and left tray rails. They reduce the operating force required for sliding in/out the paper feed tray.
(2) Locking the paper feed tray
• Pushing the lever of the paper feed tray all the way toward the rear will allow the paper feed tray to be slid into the machine.
• When the paper feed tray is inserted all the way in place, the tray lock lever equipped on the right side of the paper feed tray locks the
tray in place.
• To prevent false detection, the paper feed tray is equipped with a spring in the rear that pushes the tray back out if the tray is not inserted
all the way in place.
[1] Lever of the paper feed tray
4.2.3 Paper feed tray stopper release mechanism (PC-115/PC-215)
• The paper feed tray is equipped with a stopper mechanism.
• When paper is placed, the stopper prevents the paper feed tray from falling off from the machine even if it is pulled out.
• The paper feed tray can be removed if paper is remained inside the machine at the time of handling a paper jam or a misfeed.
[5]
[1] Tray 3 stopper
PD THEORY OF OPERATION PC-110/PC-210/PC-115/PC-215 > 4. OPERATION
[1]
[1]
[4]
[8] Paper length guide
[2]
[2] Lock lever
[2]
[3]
[2] Tray 3
PD-7