Konica Minolta bizhub C658 Service Manual page 2002

bizhub C658/C558/C458/C368/C308/C258
[1]
[1] Tray 3/4 upper limit sensor (PS116/PS126)
[3] Paper lifting plate B
(2) During a print cycle
1. As the paper is consumed, the upper limit sensor is unblocked. Then the paper lifting plate goes up.
[1]
[1] Tray 3/4 upper limit sensor (PS116/PS126)
4.2 Paper feed tray section
4.2.1 Paper size detection
• When the paper length guide of the drawer is moved, the circular paper length detection plate located on the bottom of the drawer turns.
• The paper length is detected by the lever that operates in conjunction with the paper length detection plate, and four paper length detection
sensors on the FD paper size board.
• Moving the paper width guide plate activates or deactivates two paper width detection sensors on the CD paper size board through the
cutout in the lever.
• The combination of the four paper length detection sensors and two paper width detection sensors that are either activated or deactivated,
determines the size of the paper loaded in the drawer.
• The FD paper length detection sensor detects that the drawer is slid into position as it is slid in.
[8]
[7]
[6]
[1] Paper width guide plate (front) (PC-110/C210)
[3] Paper width guide plate (rear) (PC-110/C210)
[5] Tray 3/4 CD paper size board (CDPSB/3, CDPSB/4)
PD THEORY OF OPERATION PC-110/PC-210/PC-115/PC-215 > 4. OPERATION
[4]
[2]
[1]
[5]
[2]
[3]
[2] Pick-up roller
[4] Paper lifting plate A
- -
[3]
[4]
[2] Paper width guide plate (front) (PC-115/PC-215)
[4] Paper width guide plate (rear) (PC-115/PC-215)
[6] Tray 3/4 FD paper size board (FDPSB/3, FDPSB/4)
PD-6